VS-HFA06TB120SPbF
www.vishay.com
Vishay Semiconductors
Revision: 26-Feb-16
1
Document Number: 94039
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HEXFRED
®
Ultrafast Soft Recovery Diode, 6 A
FEATURES
• Ultrafast and ultrasoft recovery
• Very low I
RRM
and Q
rr
• Specified at operating conditions
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• AEC-Q101 qualified
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
BENEFITS
• Reduced RFI and EMI
• Reduced power loss in diode and switching transistor
• Higher frequency operation
• Reduced snubbing
• Reduced parts count
DESCRIPTION
VS-HFA06TB120S is a state of the art ultrafast recovery
diode. Employing the latest in epitaxial construction and
advanced processing techniques it features a superb
combination of characteristics which result in performance
which is unsurpassed by any rectifier previously available.
With basic ratings of 1200 V and 6 A continuous current, the
VS-HFA06TB120S is especially well suited for use as the
companion diode for IGBTs and MOSFETs. In addition to
ultrafast recovery time, the HEXFRED
®
product line features
extremely low values of peak recovery current (I
RRM
) and
does not exhibit any tendency to “snap-off” during the
t
b
portion of recovery. The HEXFRED features combine to
offer designers a rectifier with lower noise and significantly
lower switching losses in both the diode and the switching
transistor. These HEXFRED advantages can help to
significantly reduce snubbing, component count and
heatsink sizes. The HEXFRED VS-HFA06TB120S is ideally
suited for applications in power supplies and power
conversion systems (such as inverters), motor drives, and
many other similar applications where high speed, high
efficiency is needed.
PRODUCT SUMMARY
Package TO-263AB (D
2
PAK)
I
F(AV)
6 A
V
R
1200 V
V
F
at I
F
2.4 V
t
rr
(typ.) 26 ns
T
J
max. 150 °C
Diode variation Single die
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Cathode to anode voltage V
R
1200 V
Maximum continuous forward current I
F
T
C
= 100 °C 6
ASingle pulse forward current I
FSM
80
Maximum repetitive forward current I
FRM
24
Maximum power dissipation P
D
T
C
= 25 °C 62.5
W
T
C
= 100 °C 25
Operating junction and storage temperature range T
J
, T
Stg
-55 to +150 °C