OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ENP2105M200

P1-P3
ENxxHarshDutyCables-1414-1/3
.
Harsh Duty Ethernet Connectors and Cabling
Overview
By combining standard RJ-45 connection technology with the industrially-proven mini form factor, these Industrial
Ethernet Connectivity products provide a line-up designed to safeguard the integrity of your data even in the harshest
manufacturing, processing or commercial settings.
Features
• Environmental Sealing
• Vibration Resistance
• Secure Robust Connections
• Performance in Electrically Noisy Conditions
Receptacles
The following receptacles offer solutions for Ethernet field device connectivity, regardless of the operating environment.
All receptacles are compatible with commercial RJ-45 connectors, enabling one solution for both harsh and benign
environments.
110 Punchdown Block
Simple termination via Insulation Displacement Connections (IDC) with the use of commonly
available punchdown tools. Ideal for premise wiring applications.
ENDR2FB5 ......... 110 receptacle, 568A and 568B wiring, back-side locking nut
Direct PCB Mount Receptable
Short depth receptacle that solders directly to a Printed Circuit Board (PCB)-intended for
OEMs who wish to incorporate a robust, sealed connection into their field equipment.
ENPR1FF5 .......... Direct PCB-mount, 8-pin through-hole receptable, front coupling nut
ENxxHarshDutyCables-1414-2/3
.
Closure Cap
Maintains sealing integrity when a connector is not mated with the receptacle.
67-0300 .............. IP67 rated closure cap with lanyard
Standard PCB Board Receptacle
Highly flexible, enables an OEM or end-user to solder a cable lead to an internal Ethernet
connection.
ENSR1FB5 ............. Receptacle with PC board
ENSR1FB5C305 .... Receptacle with PCB & 12” of cable (1oBase-T)
Bulkhead Passthrough
To bring Ethernet into a cabinet or control box, simply create the sealed connection on the
outside of the enclosure, and run a commercial patch cord from the backside RJ-45 jack to
your PLC, I/O, or Ethernet Control Board. No conduit entry is required.
ENSP1F5 ............RJ-45 Bulkhead passthrough with backside jack
ENSP1F5C305 ....RJ-45 Bulkhead passthrough with 12” of patch cord
Receptacle Specifications
O-Ring Material: Nitrile Rubber
Receptacle Shell Material: Acrylonitrile-Butadiene-Styrene (ABS)—standard version
Knockout Hole for Receptacle: 1.031
Mating Thread: UNC 1” - 14
Operating Temperature: -20 to 80 °C
Return Loss: 5 dB @ 100 MHZ
Shock/Vibration: Per IEC 60068-2-6
Environmental Rating: IEC IP67
TIA/EIA Rating
110 Punchdown: Category 5e compliant
Bulkhead Passthrough: Category 5e compliant
Direct PCB Mount: Category 5 compliant
Standard PC Board: Not Rated—additional customer termination is required
RJ-45 Jack
Base Material: Copper alloy w/30 µ -inches, gold alloy
Underplating: 2.54 microns of nickel
Mating Cycles: 250, minimum
Current Rating: 1.5 Amp
Voltage Rating: 125 VDC
ENxxHarshDutyCables-1414-3/3
.
Cordsets
Cordsets utilize a standard RJ-45 plug, but add strain relief and a locking mechanism that creates a seal when mated
with a receptacle. Cordsets can be ordered to length as an overmolded cordset, or as an attachable device that can be
assembled in the field.
Overmolded Cordsets are available in two configurations. When both cord ends are in a harsh environment, order
with two industrial sealed connectors; for a cable with one end in a harsh environment, and the other in a sealed or
office area, order with one industrial connector and one commercial grade plug for a better fit into a standard patch
panel.
ENS1115M020 ....... Male Industrial to Male Industrial RJ45, 2 meter, 10 Base-T, 4 conductor
ENS1115M040 ....... Male Industrial to Male Industrial RJ45, 4 meter, 10 Base-T, 4 conductor
ENS1115M050 ....... Male Industrial to Male Industrial RJ45, 5 meter, 10 Base-T, 4 conductor
ENS1135M020 ....... Male Industrial to Male Standard RJ45, 2 meter, 10 Base-T, 4 conductor
ENS1135M040 ....... Male Industrial to Male Standard RJ45, 4 meter, 10 Base-T, 4 conductor
ENS1135M050 ....... Male Industrial to Male Standard RJ45, 5 meter, 10 Base-T, 4 conductor
ENS2115M020 ....... Male Industrial to Male Industrial RJ45, 2 meter, 568A, 8 conductor
ENS2115M040 ....... Male Industrial to Male Industrial RJ45, 4 meter, 568A, 8 conductor
ENS2115M050 ....... Male Industrial to Male Industrial RJ45, 5 meter, 568A, 8 conductor
ENS2135M020 ....... Male Industrial to Male Standard RJ45, 2 meter, 568A, 8 conductor
ENS2135M040 ....... Male Industrial to Male Standard RJ45, 4 meter, 568A, 8 conductor
ENS2135M050 ....... Male Industrial to Male Standard RJ45, 5 meter, 568A, 8 conductor
Connector Specifications
Insert Material: Acrylonitrile-Butadiene-Styrene (ABS)
Overmold Material: Polyurethane (Solid Core & Proplex)
Coupling Nut Material: Acrylonitrile-Butadiene-Styrene (ABS)—standard version
Acrylonitrile-Styrene-Acrylate (Luran™ S778 T/TE)—UV stabilized version
Recommended Mating Torque: 12-inch-lbs.
Field Attachable Connector
Assemble the connection in the field using a
standard crimping tool, and still enjoy the same IP67
sealed connection as the overmolded cordset. One
thousand foot bulk cable put-ups are available for
both Solid Core PUR and Proplex cable.
ENSAM315 ..... Field attachable RJ-45 connector for solid core C5 cable
ENQAM315 ..... Field attachable RJ-45 connector for stranded core C5 cable
P1-P3

ENP2105M200

Mfr. #:
Buy ENP2105M200
Manufacturer:
B+B SmartWorx
Description:
Ethernet Cables / Networking Cables MALE IND RJ45 TO OPEN PROPLEX-KEVLAR 20M
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet