Mating and Unmating
Force
5000 Megohms MIN
-55°C To +105°C
1oz To 10oz (0.28N To 2.78N) Per Contact Position
Contact Plating
Contact Resistance
Dielectric Voltage 1000V AC rms at Sea Level
Insulator Material
10 Milliohms MAX
Selective Gold (See Ordering Code) over Nickel for
the Mating Area, Tin Plating for Tail Area
Thermoplastic Polyester, UL 94V-0, Chemical
Resistant, Color: Black (Blue for MBB Contact)
Plug (Pins): Brass
Receptacle (Socket): Brass or Phosphor Bronze
Contact Material
Current Rating
Shell Material
20dB MIN @30 MHz, 30dB MIN @50 MHz, and
50dB MIN @100 MHz
Nickel Plated Steel
5A Per Contact
Insulation Resistance
Operating Temp.
Ferrite Specs:
SERIES 621/622: D-SUB CONNECTOR
Ordering Code:
www.edac.net
Plug and Receptacle, Right Angle, .318"(8.08mm) Footprint
• Two Contact Rows with .318"(8.08mm) Footprint Right Angle Bend
• .109"(2.77mm) Contact Spacing X .112"(2.82mm) Row Spacing
• Plug and Receptacle in 9, 15, 25, or 37 Contact Sizes
• Pin and Socket Contact Mating Design with P.C. Tail Termination
• Metal Shell Provides EMI/RFI Shielding, Plug Shell Indents provide
Grounding and Additional Mating Retention
• Grounding Features include Top or Bottom Ground Plates and Four
Prong Boardlock for Superior Retention to P.C. Board
• Mounting Options for Panel Mount or Connector Mating include
Through Hole, Threaded Inserts and Threaded Standoffs
• D-Shaped Connector Mating Outline provides Polarization
• Design based on Requirements of MIL-C-24038, EIA RS-232 and RS-449
Specifications:
SERIES:
621: PLUG (PIN)
622: RECEPTACLE (SOCKET)
621-025-260-013
NO. OF CONTACTS:
009 - 9 CONTACTS 025 - 25 CONTACTS
015 - 15 CONTACTS 037 - 37 CONTACTS
CONTACT FINISH CODE:
2 - GOLD FLASH PLATING
3 - 15 MICROINCHES OF GOLD PLATING
6 - 30 MICROINCHES OF GOLD PLATING
CONTACT CODE:
60 - .318" FOOTPRINT POWER CONTACT
68 - .318" FOOTPRINT WITH FERRITE FILTER
MOUNTING OPTIONS:
0 - 4-40 UNC ROUND THREADED STANDOFF
1 - Ø.125"(Ø3.18MM) THROUGH HOLE
2 - 4-40 UNC THREADED INSERT
3 - 4-40 UNC THREADED STANDOFF
MATERIAL CODE:
0 - BRASS (621); PHOSPHOR BRONZE (622)
1 - BRASS (622 ONLY)
5 - PHOSPHOR BRONZE, HIGH TEMP INSULATOR
6 - BRASS, HIGH TEMP INSULATOR
GROUNDING FEATURE:
1 - Ø.120"(Ø3.05MM) THROUGH HOLE TOP GROUND
2 - Ø.120"(Ø3.05MM) THROUGH HOLE BOTTOM GROUND
3 - TWO PRONG BOARDLOCKS FOR Ø.120"(Ø3.05MM) HOLE
4 - FOUR PRONG BOARDLOCKS FOR Ø.120"(Ø3.05MM) HOLE
Rev.1
