D
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.25 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: In excess of 750,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
GLASS EPOXY INSULATION SWITCHES - 15° INDEXING
ADJUSTABLE STOPS - SOLDER LUG TERMINALS - STOPS SET @ 2 POS.
SPECIFICATIONS AND ORDERING INFORMATION
D9 - SERIES
2 5/16" DIAMETER 1.5 AMPS @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy.
Index: Dual-ball, hill and valley design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 15° standard.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGE 57.
STANDARD CONSTRUCTION
D9G - GLASS EPOXY
CONSTRUCTION
34
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
The D9 Series has a 15° index with a maximum of 24 positions.
Indexing is provided by a dual-ball hill and valley design. Standard
features include solder lug terminals, adjustable stops and glass
epoxy insulation.
01 02-23 1 1 D9G0123S D9G0123N DU
02 02-23 1 2 D9G0223S D9G0223N DU
03 02-23 1 3 D9G0323S D9G0323N DU
04 02-23 1 4 D9G0423S D9G0423N DU
05 02-23 1 5 D9G0523S D9G0523N DU
06 02-23 1 6 D9G0623S D9G0623N DU
07 02-23 1 7 D9G0723S D9G0723N DU
08 02-23 1 8 D9G0823S D9G0823N DU
