MB20H90CT, MB20H100CT, MF20H100CT
www.vishay.com
Vishay General Semiconductor
Revision: 16-Nov-17
1
Document Number: 87736
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Dual Common Cathode High Voltage Schottky Rectifier
High Barrier Technology for Improved High Temperature Performance
FEATURES
• Power pack
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for D
2
PAK (TO-263AB) package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for ITO-220AB package)
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode power
supplies, freewheeling diodes, DC/DC converters and
polarity protection application.
MECHANICAL DATA
Case: ITO-220AB, D
2
PAK (TO-263AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
I
F(AV)
2 x 10 A
V
RRM
90 V to 100 V
I
FSM
250 A
I
R
4.5 μA
V
F
0.64
T
J
max. 175 °C
Package ITO-220AB
, D
2
PAK (TO-263AB)
Diode variations Common cathode
1
2
3
ITO-220AB
MF20H100CT
MB20H90CT
MB20H100CT
PIN 2
PIN 1
PIN 3
PIN 1
PIN 2
K
HEATSINK
1
2
K
D
2
PAK (TO-263AB)
MAXIMUM RATINGS (T
A
= 25 °C unless otherwise noted)
PARAMETER SYMBOL MB20H90CT MB20H100CT UNIT
Maximum repetitive peak reverse voltage V
RRM
90 100
VWorking peak reverse voltage V
RWM
90 100
Maximum DC blocking voltage V
DC
90 100
Maximum average forward rectified current
total device
I
F(AV)
20
A
per diode 10
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
I
FSM
250
Peak repetitive reverse current per diode at t
p
= 2.0 µs, 1 kHz I
RRM
1.0
Voltage rate of change (rated V
R
) dV/dt 10 000 V/μs
Operating junction and storage temperature range T
J
. T
STG
-65 to +175 °C
Isolation voltage (ITO-220AB only)
from terminal to heatsink t = 1 min
V
AC
1500 V