Management Interface
The management interface for this PDU model is transitioning to a new technology platform. The new
interface can be distinguished by a USB-A port (for EnviroSense2 modules) in place of the
round ENVIROSENSE port. For managing the units containing the round port, Tripp Lite recommends
using the PowerAlert Console Launcher rather than a web browser. This application enables local access
of the PDU using a self-contained, compatible Java Runtime Environment version. The Console Launcher
can be downloaded for free; click the above link or go to the Management Solutions / Utilities page. Units
with the new interface work will with most current web browsers.
5.76kW Single-Phase ATS/Switched PDU, LX
Platform Interface, 208/240V (16 C13, 2 C19 & 1
L6-30R) 2 L6-30P Inputs, 2U Rack-Mount, TAA
MODEL NUMBER: PDUMH30HVATNET
Description
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded
network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power
sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input
cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the
secondary power source until the primary input is restored and stable. Highly reliable solid-state switching
between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include
individually controllable output receptacles and built-in network interface. Super-fast switchover between
primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any
two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant
power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a
single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system.
In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with
zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a
two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even
separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power
quality on both input sources to prevent transfer to the secondary source when unavailable or of lower
quality than the primary source. Front input LED's display primary or secondary power availability. Built-in
LX Platform network management interface card. The Java-free LX Platform HTML5-based network
interface enables full remote access for PDU status monitoring and
email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing
for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately)
provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS,
SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
Features
208/240V 30A Automatic Transfer Switch (ATS) / Switched PDU (Agency de-rated to 24A continuous)
●
Highlights
Single phase 30A 208/240V
Auto Transfer Switch / ATS PDU
with Solid State Switching
●
Separate primary & secondary
inputs enable redundant-power
option for non-redundant
network devices
●
LX Platform Network Interface
●
2U rackmount, 2 L6-30P inputs,
19 switched outlets (16 C13, 2
C19, 1 L6-30R)
●
Individually switched outlets,
network interface and visual
current, voltage and
environmental monitoring
●
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
●
Package Includes
2U ATS PDU
●
Rackmount installation brackets
●
Cable retention plates and cable
ties
●
User manual
●
1 / 4
