DESCO WEST: 3651 WALNUTAVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DATE:
2/06
© 2006 DESCO INDUSTRIES INC.
Employee Owned
MATERIAL STATFREE T2™
DRAWING PM-104
STATFREE T2™ MATERIAL, DISSIPATIVE, RUBBER, 2-LAYER, 0.060" (1.5mm)
Electrical Properties:
Property Test Method Value
RTT Resistance: ESD S4.1 1
0
6
- 10
8
Ohms
RTG Resistance: ESD S4.1 10
6
- 10
8
Ohms
Charge Decay: FTMS 101C, Method 4046 0.01seconds
Electrical Properties obtained by testing to industrial standards by an
independent testing laboratory @ 100 Volts and 50% relative humidity unless
otherwise specified. Complete text of the test report is available upon request.
Specifications:
Construction: Dual-layer rubber material
Thickness: 0.060" (1.5mm)
Color:* Blue, Dark Blue, Dark Grey, Beige (top), Black (bottom)
Texture:* Slight embossed
Weight: 0.43 lbs./sq. ft. (0.2g/cm
2
)
Hardness: 65 ± 5 Shore “A”, per ASTM-D2240
Heat Resistance: Does not melt or burn when coming into contact with hot solder and soldering irons.
Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons,
mineral oil, aldehydes, and amines
*Color and texture may vary between lots and mills
Grounding:
This material must be properly grounded for optimum electrical performance. Ask for Technical Bulleltin TB-2000
for mat grounding instructions.
Cleaning:
Use only ESD mat cleaner such as Reztore™ Surface & Mat Cleaner to clean and extend mat useful life. Do not
use cleaners contaiing silicone as silicone will create an insulative film on the surface. Do not use solvent based cleaners
as solvents will dry out matting and may cause curling.
Description:
Statfree T2™ meets the worksurface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. This
material is a dual purpose rubber matting material. The two layer construction allows it to be used as a dissipative or
a conductive matting product. The soft dissipative layer makes an excellent table mat, ideal for use in soldering and
assembly areas. This rubber material has superior resistance to heat, abrasion, chemicals, and is easy to clean and
maintain. Statfree T2
™ material will not melt and does not burn when coming into contact with hot metal parts or soldering
debris. It is amine, chloride, sulfide, alumina, and magnesia free. Statfree T2
™ is suitable for use with continuous monitors.
Statfree T2™ is manufactured without any ozone depleting substances, and in
accordance with the Montreal Protocol.
See reverse side for available
mat and roll sizes.
BLUE, DARK GREY,
DARK BLUE
Disclaimer:
All statements, technical data, and recommendations
contained herein are based upon tests we believe to
be reliable. However, the accuracy or completeness
thereof is not guaranteed. The proper and correct
applications of products and data is the responsibility
of the user. Statements or recommendations not
contained herein shall have no force or effect unless
embodied in a written agreement signed by
authorized offers of Desco Industries, Inc.
Made in America
Limited Lifetime Warranty:
Desco warrants for one year that
Statfree
®
matting products will be free of
defects in materials and workmanship and
will guarantee dissipative/
conductive mat properties for the life of
the mat. Damage to matting caused by
misuse of any kind, including using
inappropriate cleaners is not covered by
Desco Limited Warranty.
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing this
product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Desco Industries Inc. letter on-line
at Desco.com.
