SPEC NO: DSAO3291 REV NO: V.3A DATE: MAY/12/2016 PAGE: 2 OF 5
APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203014744
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 611 nm I
F=10mA
λD [1] Dominant Wavelength Super Bright Orange 605 nm I
F=10mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 17 nm I
F=10mA
V
F [2] Forward Voltage Super Bright Orange 2.01 2.4 V IF=10mA
I
R Reverse Current Super Bright Orange 10 uA VR=5V
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Parameter Values Units
Power dissipation 48 mW
DC Forward Current 20 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 10mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APG0603SEC-TT Super Bright Orange (AlGaInP) Water Clear
60 150
*20 *50
140
°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
