NL27WZ04
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Characteristics Value Units
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
I
DC Input Voltage −0.5 ≤ V
I
≤ +7.0 V
V
O
DC Output Voltage
Output in HIGH or LOW State (Note 1)
−0.5 ≤ V
O
≤ 7.0
V
I
IK
DC Input Diode Current V
I
< GND −50 mA
I
OK
DC Output Diode Current V
O
< GND −50 mA
I
O
DC Output Source/Sink Current ±50 mA
I
CC
DC Supply Current Per Supply Pin ±100 mA
I
GND
DC Ground Current Per Ground Pin ±100 mA
T
STG
Storage Temperature Range −65 to +150 °C
P
D
Power Dissipation in Still Air
SC−88, TSOP−6 (Note 2)
200
mW
q
JA
Thermal Resistance
SC−88, TSOP−6 (Note 2)
333
°C/W
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias +150 °C
V
ESD
ESD Withstand Voltage
Human Body Model (Note 3)
Machine Model (Note 4)
Charged Device Model (Note 5)
> 2000
> 200
N/A
V
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 125°C (Note 6) ±100 mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. I
O
absolute maximum rating must be observed.
2. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow.
3. Tested to EIA/JESD22−A114−A
4. Tested to EIA/JESD22−A115−A
5. Tested to JESD22−C101−A
6. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol Min Max Units
Supply Voltage
Operating
Data Retention Only
V
CC
1.65
1.5
5.5
5.5
V
Input Voltage V
I
0 5.5 V
Output Voltage (HIGH or LOW State) V
O
0 5.5 V
Operating Free−Air Temperature T
A
−55 +125 °C
Input Transition Rise or Fall Rate
V
CC
= 2.5 V ±0.2 V
V
CC
= 3.0 V ±0.3 V
V
CC
= 5.0 V ±0.5 V
Dt/DV
0
0
0
20
10
5
ns/V
