ESD9P5.0ST5G Datasheet ESD9P5.0ST5G | P1-P3

October, 2017 − Rev. 2

1 Publication Order Number:

ESD9P5.0S/D

ESD9P5.0ST5G

ESD Protection Diode,

Ultra-Low Capacitance

The ESD9P Series is designed to protect voltage sensitive components

that require low capacitance from ESD and transient voltage events.

Excellent clamping capability, low capacitance, low leakage, and fast

response time, make these parts ideal for ESD protection on designs that

utilize high−speed lines such as USB.

Specification Features:

• Low Capacitance 1.3 pF

• Low Clamping Voltage

• Small Body Outline Dimensions:

0.039″ x 0.024″ (1.00 mm x 0.60 mm)

• Low Body Height: 0.016″ (0.4 mm)

• Stand−off Voltage: 5 V

• Low Leakage

• Response Time is Typically < 1.0 ns

• IEC61000−4−2 Level 4 ESD Protection

• AEC−Q101 Qualified

• This is a Pb−Free Device

Mechanical Characteristics:

CASE:

Void-free, transfer-molded, thermosetting plastic

Epoxy Meets UL 94 V−0

LEAD FINISH: 100% Matte Sn (Tin)

MOUNTING POSITION: Any

QUALIFIED MAX REFLOW TEMPERATURE: 260°C

Device Meets MSL 1 Requirements

MAXIMUM RATINGS

Rating Symbol Value Unit

IEC 61000−4−2 (ESD) Contact

Air

±10

±15

Total Power Dissipation on FR−5 Board

(Note 1) @ T

= 25°C

°P

° 150 mW

Junction and Storage Temperature Range T

, T

stg

−55 to

+150

°C

Lead Solder Temperature − Maximum

(10 Second Duration)

260 °C

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

1. FR−5 = 1.0 x 0.75 x 0.62 in.

See Application Note AND8308/D for further description of survivability specs.

Device Package Shipping

†

ORDERING INFORMATION

SOD−923

CASE 514AB

ESD9P5.0ST5G SOD−923

(Pb−Free)

8000/Tape & Reel

MARKING DIAGRAM

See specific marking information in the device marking

column of the Electrical Characteristics tables starting on

page 2 of this data sheet.

DEVICE MARKING INFORMATION

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

T = Specific Device Code

M = Date Code

www.onsemi.com

T M

ESD9P5.0ST5G

www.onsemi.com

ELECTRICAL CHARACTERISTICS

= 25°C unless otherwise noted)

Symbol

Parameter

Maximum Reverse Peak Pulse Current

Clamping Voltage @ I

RWM

Working Peak Reverse Voltage

Maximum Reverse Leakage Current @ V

RWM

Breakdown Voltage @ I

Test Current

Forward Current

Forward Voltage @ I

Peak Power Dissipation

C Max. Capacitance @ V

= 0 and f = 1.0 MHz

*See Application Note AND8308/D for detailed explanations of

datasheet parameters.

Uni−Directional Surge Protector

RWM

ELECTRICAL CHARACTERISTICS (T

= 25°C unless otherwise noted, V

= 1.0 V Max. @ I

= 10 mA for all types)

Device

Marking

RWM

(V)

(mA)

@ V

RWM

(V) @ I

(Note 2)

C (pF)

(V)

@ I

= 1 A

(Note 4)

Max Max Min mA Max Max

Per IEC61000−4−2

(Note 3)

ESD9P5.0ST5G T 5.0 1.0 5.8 1.0 1.3 9.8 Figures1and 2

See Below

*Other voltages available upon request.

2. V

is measured with a pulse test current I

at an ambient temperature of 25°C.

3. For test procedure see Figures 3 and 4 and Application Note AND8307/D.

4. Surge current waveform per Figure 5.

Figure 1. ESD Clamping Voltage Screenshot

Positive 8 kV Contact per IEC61000−4−2

Figure 2. ESD Clamping Voltage Screenshot

Negative 8 kV Contact per IEC61000−4−2

ESD9P5.0ST5G

www.onsemi.com

IEC 61000−4−2 Spec.

Level

Test

Voltage

(kV)

First Peak

Current

(A)

Current at

30 ns (A)

Current at

60 ns (A)

1 2 7.5 4 2

2 4 15 8 4

3 6 22.5 12 6

4 8 30 16 8

peak

90%

10%

IEC61000−4−2 Waveform

100%

I @ 30 ns

I @ 60 ns

= 0.7 ns to 1 ns

Figure 3. IEC61000−4−2 Spec

50 W

Cable

DUT

Oscilloscope

ESD Gun

Figure 4. Diagram of ESD Test Setup

The following is taken from Application Note

AND8308/D − Interpretation of Datasheet Parameters

for ESD Devices.

ESD Voltage Clamping

For sensitive circuit elements it is important to limit the

voltage that an IC will be exposed to during an ESD event

to as low a voltage as possible. The ESD clamping voltage

is the voltage drop across the ESD protection diode during

an ESD event per the IEC61000−4−2 waveform. Since the

IEC61000−4−2 was written as a pass/fail spec for larger

systems such as cell phones or laptop computers it is not

clearly defined in the spec how to specify a clamping voltage

at the device level. ON Semiconductor has developed a way

to examine the entire voltage waveform across the ESD

protection diode over the time domain of an ESD pulse in the

form of an oscilloscope screenshot, which can be found on

the datasheets for all ESD protection diodes. For more

information on how ON Semiconductor creates these

screenshots and how to interpret them please refer to

AND8307/D.

Figure 5. 8 X 20 ms Pulse Waveform

100

020406080

t, TIME (ms)

% OF PEAK PULSE CURRENT

PULSE WIDTH (t

) IS DEFINED

AS THAT POINT WHERE THE

PEAK CURRENT DECAY = 8 ms

PEAK VALUE I

RSM

@ 8 ms

HALF VALUE I

RSM

/2 @ 20 ms

P1-P3 P4-P4

ESD9P5.0ST5G

Mfr. #:

Buy ESD9P5.0ST5G

Manufacturer:

ON Semiconductor

Description:

TVS Diodes / ESD Suppressors UNIDIR LO CAP ESD DIODE

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

ESD9P5.0ST5G