DRAWING NUMBER
REV
1501 ROUTE 34 SOUTH
FARMINGDALE, NJ 07727
TITLE
MATERIAL
FSCM
FINISH:
83330
THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND
THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING
OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE
FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT.
.118
[3]
.091
[2,3]
.063
[1,6]
.051
[1,3]
.020
[0,5]
.063
[1,6]
.067
[1,7]
.079
[2]
TYP.
.063#.002
1,6#0,05[ ]
.059#.002
1,5#0,05[ ]
TYP.
.057#.002
1,45#0,05[ ]
TYP.
.134#.008
3,4#0,2[ ]
TYP.
.157#.004
4#0,1[ ]
TYP.
.079#.002
2#0,05[ ]
.315#.008
8#0,2[ ]
.137#.002
3,48#0,05[ ]
.069#.004
1,75#0,1[ ]
-.020.000
-0,490,01[ ]
.216#.008
[5,5#0,2]
DIALIGHT
PART NUMBER
PACKAGING
LED
COLOR
597-3002-502F SAMPLE STRIP
AllnGaP RED (630 nm)
597-3002-507F 7" REEL
597-3032-502F SAMPLE STRIP
AllnGaP RED (620 nm)
597-3032-507F 7" REEL
597-3202-502F SAMPLE STRIP
AllnGaP ORANGE
597-3202-507F 7" REEL
597-3402-502F SAMPLE STRIP
AllnGaP YELLOW
597-3402-507F 7" REEL
597-3502-502F SAMPLE STRIP
AllnGaP YELLOW GREEN
597-3502-507F 7" REEL
597-3312-502F SAMPLE STRIP
AllnGaP GREEN (560 nm)
597-3312-507F 7" REEL
597-3322-502F SAMPLE STRIP
InGaN GREEN (525 nm)
597-3322-507F 7" REEL
597-3602-502F SAMPLE STRIP
InGaN BLUE
597-3602-507F 7" REEL
597-3902-502F SAMPLE STRIP
InGaN WHITE
597-3902-507F 7" REEL
OPERATING CHARACTERISTICS AT 25$C AMBIENT
LED COLOR
LUMINOUS INTENSITY
@I
F = 20 mA
(mcd)
FORWARD VOLTAGE
@IF = 20 mA
(V)
REVERSE
CURRENT
( A)
DOMINANT
WAVELENGTH
(nm)
PEAK
WAVELENGTH
(nm)
VIEWING
ANGLE
(DEG)
MIN TYP MAX TYP MAX MAX MIN TYP MAX TYP TYP
AllnGaP RED (630 nm) 25 63 160 2.2 2.7 10 625 630 635 630 110
AllnGaP RED (620 nm) 40 100 250 2.2 2.7 10 615 620 625 620 110
AllnGaP ORANGE 63 160 400 2.2 2.7 10 602 605 608 605 110
AllnGaP YELLOW 63 160 400 2.2 2.7 10 587 590 593
590 110
AllnGaP YELLOW GREEN 10 25 63 2.2 2.7 10 569 572 575 572 110
GREEN (560 nm) 9 18 36 2.1 2.5 10 558 560 564 565 110
InGaN GREEN (525 nm) 56 140 360 3.2 4.0 100 520 525 535 523 110
InGaN BLUE 36 100 3.3 4.2 100 465 470 475 468 110
InGaN WHITE 360 900 3.2 4.3 100 *X=0.3; Y=0.3 110
ABSOLUTE MAXIMUM RATINGS AT 25 $C AMBIENT
LED COLOR
UNITS
AllnGaP
RED (630 nm)
AllnGaP
RED (620 nm)
AllnGaP
ORANGE
AllnGaP
YELLOW
AllnGaP
Y/G
GREEN
(560 nm)
InGaN GREEN
(525 nm)
InGaN
BLUE
InGaN
WHITE
POWER DISSIPATION 54 54 54 54 54 62 84 84 84 mW
CONTINUOUS FORWARD CURRENT 20 20 20 20 20 25 20 20 20 mA
PEAK FORWARD CURRENT (1/10 DUTY CYCLE, 0.1ms PULSE WIDTH) 100 100 100 100 100 60 100 100 100 mA
LINEAR DERATING 0.26 (FROM 40$C) 0.50 (FROM 70$C) 0.40 (FROM 60$C) mA/$C
REVERSE VOLTAGE 5 V
STORAGE TEMPERATURE -40 TO +100 $C
OPERATING TEMPERATURE
-40 TO +85 -40 TO +100 -30 TO +85 $C
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FRACTIONS: #1/64
DECIMALS (.XX): #.02
DECIMALS (.XXX): #.008
ANGLES: #1$
SCALE: 30.000
ALL DIM'S IN: INCHES (MM)
C-17866 A
1208 CHIP LED WITH REFLECTOR
RoHS COMPLIANT
-
-
SHEET 1 OF 1 FAMILY TABLE:
REV ECN NO REVISIONS DRN CKD APP DATE
A NEW RELEASE
AJF KLJ NO 9-22-10
RoHS COMPLIANT 597-3XX2-50XF
Part Numbers with the "F" suffix ending are RoHS Compliant.
For example: 597-3002-502F
Reel and bag packaging are marked with "RoHS Compliant"
label or equivalent markings. These parts can be used with
RoHS reflow profile. Parts can be wave soldered, dip soldered
or hand soldered using typical lead-free soldering process
with max 260°C temp. for 5 sec.
MAX 250$C, WITHIN 10sec
140~180$C
TIME
TEMPERATURE
RECOMMENDED RoHS SOLDER PROFILE
150.0
200.0
100.0
250.0
300.0
0.0
$C
50.0
210~250$C
1min
MINIMUM
40sec
MAX
NOTES:
1. EPOXY COLOR: WATER CLEAR.
2. MOISTURE SENSITIVITY LEVEL: 3.
3. TAPE & REEL AS PER EIA STANDARD 481-1-A; CATHODE TOWARDS SPROCKET.
4. TAPE & REEL MAY REQUIRE RE-TAPING AFTER 12 MONTHS.
5. PIN NUMBERS ARE FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART.
6. DIALIGHT PART NUMBERS: 597-3XX2-50XF.
7. ...-502F SUFFIX MEANS PARTS PACKAGED ON A 20 PCS SAMPLE STRIP.
...-507F SUFFIX MEANS PARTS PACKAGED ON A 7" [ 180mm] REEL, 2,500 PCS/REEL.
8. PACKAGING TO INCLUDE LABEL CONTAINING DIALIGHT PART NUMBER, DATE
CODE/LOT NO., LUMINOUS INTENSITY AND COLOR BINS, QTY/REEL, AND COUNTRY OF ORIGIN.
9. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
(ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY,
HANDLING AND STORAGE IN ACCORDANCE WITH IPC-A-610.
*CHROMATICITY COORDINATES (TYP)
CATHODE MARK
LED DIE
PIN 1
PIN 2
RECOMMENDED PAD LAYOUT
SCALE 4.000
USER FEED DIRECTION
TAPE & REEL CONFIGURATION
CATHODE MARK
ATTENTION:
OBSERVE PRECAUTIONS FOR
HANDLING ELECTROSTATIC
SENSITIVE DEVICES
LED SCHEMATIC
PIN 1
CATHODE
PIN 2
