https://www.phoenixcontact.com/pi/products/2800977
08/19/2018Page2/5
Surge protection device-PT-IQ-1X2+F-24DC-UT-2800977
Technical data
Ambient conditions
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 4000 m (amsl (above mean sea level))
Degree of protection IP20
General
Housing material PA 6.6
Flammability rating according to UL 94 V-0
Color jet black RAL 9005
Mounting type DIN rail: 35 mm
Type DIN rail module, two-section, divisible
Direction of action
Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-
Earth Ground
Additional descriptions
Note
Remote signaling as well as the power supply of the DIN rail connector
are established by snapping the module into place on the DIN rail
connector.
Protective circuit
IEC test classification C1
C2
C3
D1
Nominal voltage U
N
24 V DC
Maximum continuous voltage U
C
30 V DC
21 V AC
Rated current 1000 mA (40 °C)
Operating effective current I
C
at U
C
≤ 1 mA (in the signal circuit)
Residual current I
PE
≤ 1 µA
Nominal discharge current I
n
(8/20) µs (line-line)
10 kA
Nominal discharge current I
n
(8/20) µs (line-earth)
10 kA
Pulse discharge current I
imp
(10/350)µs (line-earth)
2.5 kA
Total discharge current I
total
(8/20)µs
20 kA
Voltage protection level U
p
(line-line)
≤ 80 V (C1 - 1 kV/500 A)
≤ 130 V (C2 - 10 kV / 5 kA)
≤ 150 V (C2 - 10 kA)
≤ 55 V (C3 - 25 A)
≤ 60 V (C3 - 100 A)
Voltage protection level U
p
(line-earth)
≤ 900 V (C1 - 1 kV/500 A)
≤ 1300 V (C2 - 10 kV / 5 kA)
≤ 1200 V (C2 - 10 kA)
≤ 1000 V (C3 - 25 A)
≤ 1300 V (C3 - 100 A)