© 2013 IXYS All rights reserved
1 - 3
20130111b
VUI 30-12 N1
IXYS reserves the right to change limits, test conditions and dimensions.
Rectifier Module
for Three Phase
Power Factor Correction
Application:
Three phase rectifier with power factor
correction, set up as follows:
• input from three phase mains
- wide range of input voltage
- mains currents approx. sinusoidal
in phase with mains voltage
- topology permits to control overcurrent
such as in case of input voltage peaks
• output
- direct current link
- buck type converter - reduced output
voltage
- possibility to supply boost converter,
inverter etc.
• required components
- one power semiconductor module per
phase
- one inductor and one capacitor per
phase on mains side
- output inductor, depending on supplied
circuit
Features:
• NPT IGBT with low saturation voltage
• Fast recovery epitaxial diodes (FRED)
Package:
• High level of integration
• Solder terminals for PCB mounting
• Isolated DCB ceramic base plate
• Large creepage and strike distances
Part name (Marking on product)
VUI30-12N1
Typ. Rectified Mains Power
P
n
= 15 kW at
V
n
= 400 V 3~
f
T
= 15 kHz
T
C
= 80°C
10
9
6
5
D1
D2
2
1
D3
D4
T
1
2
5
6
9
10
Preliminary data