IRAMS06UP60B
Series
6A, 600V
with Internal Shunt Resistor
www.irf.com 1
Features
• Internal Shunt Resistor
• Integrated Gate Drivers and Bootstrap Diodes
• Temperature Monitor
• Overcurrent shutdown
• Fully Isolated Package.
• Low V
CE(on)
Non Punch Through IGBT Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise
immunity
• Motor Power range 0.1~0.5kW / 85~253 Vac
• Isolation 2000V
RMS
/1min
Plug N Drive
TM
Integrated Power
Module for Appliance Motor Drive
Description
International Rectifier’s IRAMS06UP60B is an Integrated Power Module developed and optimized for
electronic motor control in appliance applications specifically for VF compressor drives for refrigerators and
freezer or in heating and ventilation as electronic fan controls. The IRAMS06UP60B offers an extremely
compact, high performance AC motor-driver in a single isolated package for a very simple design.
An internal shunt is included and offers easy current feedback and overcurrent monitor for precise control
and safe operation. A built-in temperature monitor and over-current protection, along with the short-circuit
rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe
operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity
power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further
cost reduction advantages.
PD-95832 RevC
Absolute Maximum Ratings
Note 1: Limited by current protection, see table "Inverter Section Electrical Characteristics" on page 3
Parameter Description Max. Value Units
V
CES
Maximum IGBT Blocking Voltage 600
V
+
Positive Bus Input Voltage 450
I
o
@ T
C
=25°C RMS Phase Current 6
I
o
@ T
C
=100°C RMS Phase Current 3
I
pk
Max Peak Phase Current (tp<100ms) (see Note 1) 9
F
p
Maximum PWM Carrier Frequency 20 kHz
P
d
Maximum Power dissipation per Phase 7.5 W
V
iso
Isolation Voltage (1min) 2000 V
RMS
T
J
(IGBT & Diodes)
Operating Junction temperature Range -40 to +150
T
J (Driver IC)
Operating Junction temperature Range -40 to +150
T Mounting torque Range (M3 screw) 0.8 to 1.0 Nm
A
°C
V