843021AGLFT Datasheet 843021AGLFT, 843021AG-01, 843021AG-01T | P13-P15

FEMTOCLOCK® CRYSTAL-TO-3.3V LVPECL CLOCK GENERATOR 13 Rev D 9/25/15

843021 DATA SHEET

Ordering Information

Table 11. Ordering Information

NOTE: Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

Part/Order Number Marking Package Shipping Packaging Temperature

843021AGLF 021AL “Lead-Free” 8 Lead TSSOP Tube 0C to 70C

843021AGLFT 021AL “Lead-Free” 8 Lead TSSOP Tape & Reel 0C to 70C

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the

infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal

commercial applications. Any other applications, such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not

recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product

for use in life support devices or critical medical instruments.

FEMTOCLOCK® CRYSTAL-TO-3.3V LVPECL CLOCK GENERATOR 14 Rev D 9/25/15

843021 DATA SHEET

Revision History Sheet

Rev Table Page Description of Change Date

Added Function Table.

Features section - updated Crystal, Output Frequency & VCO range bullets.

Crystal Characteristics Table - changed Frequency from 25MHz typical to 14MHz min.

and 40MHz max. Added Note 1.

AC Characteristics Table - changed Output Frequency from 125MHz typical to 112MHz

min. and 140MHz max.

10/6/04

B T11 12 Ordering Information Table - corrected count from 154 per tube to 100 10/15/04

T4A 3 Power Supply Table - increased V

to 3.3V ± 10% from 5% and is reflected throughout

the datasheet.

11/3/04

T11

Absolute Maximum Ratings - corrected Package Thermal Impedance air flow.

Thermal Resistance Table - corrected air flow.

Corrected air flow in table.

Ordering Information Table - corrected marking.

11/30/04

T11

Features Section - added Lead-Free bullet.

Ordering Information Table - added Lead-Free part number.

3/31/05

Features section - changed RMS phase jitter spec.

AC Characteristics Table - added maximum RMS Phase Jitter spec of 0.65ps.

Added LVCMOS to XTAL Interface section.

Added Termination for 3.3V LVPECL Output section.

Updated datasheet to new format.

11/21/07

T4B

T11

LVPECL DC Characteristics Table - corrected V

parameters from “Current” to

“Voltage” and units from “uA” to “V”.

AC Characteristics Table - added thermal note.

Updated text in “Power Supply Filtering Techniques”.

Updated “Overdriving the Crystal Interface” section.

Ordering Information Table - deleted “ICS” prefix for part/order column.

Updated header/footer.

10/12/10

T11 13 Ordering Information - removed leaded devices.

Updated data sheet format.

9/25/15

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in

this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined

in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether

express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This

document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably

expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or

other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as

those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any

circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected

names, logos and designs, are the property of IDT or their respective third party owners.

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138 USA

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com

Tech Support

email: clocks@idt.com

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15

843021AGLFT

Mfr. #:

Buy 843021AGLFT

Manufacturer:

IDT

Description:

Clock Generators & Support Products 1 LVPECL OUT SYNTHESIZER

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

843021AGLFT

843021AGLFT

Products related to this Datasheet