98845
Supplement C to Catalog OPE 2.1
© 2001 Klein Tools, Inc.
Printed in U.S.A.
Chicago, IL 60659-9033
www.kleintools.com
Features
Three permanently attached drop-forged
steel, corrosion-resistant finish, double-locking
Klein-Lok snap hooks with
11/16" (17 mm) throat opening.
Twin-Leg Deceleration Lanyard
Ordering Information
Cat. No. EDP No. Description Working Length
87475 87475 Klein-Lite Twin-Leg Deceleration Lanyard 6' (1.8 m)
NEW!
The Klein-Lite
®
Twin Leg Deceleration Lanyard (Cat. No. 87475) is designed for maintenance and construction professionals
who require 100% tie-off. Engineered so one lanyard leg can always be connected to an anchorage point while a working position
is being changed. The 87475 features an energy-absorbing inner core of polyester, a nylon-web outer shell and three drop-forged
steel Klein-Lok
®
snap hooks.
Built-in energy-absorbing inner core,
made of chemical resistant polyester, smoothly
expands to reduce fall-arrest forces.
Heavy-duty orange tubular nylon
webbing protects inner core.
6 ft. (1.8 m) working length (each leg). Maximum
deceleration distance of 3.5 ft. (1.1 m).
Equipped with a red warning label on
each leg that indicates when the unit has
been subjected to a severe impact force.
After severe impact, the entire unit must not
be used again and must be destroyed.
Designed solely for use in fall-arrest systems.
Reduces fall-arrest forces to less than 900 lbs.
Meets OSHA 1910 and 1926 subpart M,
ANSI A10.14 and Z359.1 standards.
Fall Arrest Positioning Suspension Retrieval
These identification symbols indicate that a particular connecting device is appropriate for use in a fall-arrest system,
where there is danger of falling from an elevated position; in a positioning system, where it is necessary to have your
hands free while working on an elevated surface; in a suspension system, where it is necessary to be positioned and
supported from above; or in a retrieval system, where it is necessary to have a quick means of being lifted out of, or
pulled from, a working environment.
Usage and Warnings for Klein-Lite Occupational Protective Equipment (OPE)
A fall could result in
serious injury or death.
Do not use unless
properly trained.
Read and follow all
instructions and warnings.
Klein harnesses and connecting devices must NOT be used by anyone who has not read, understood and
followed all the instructions and inspection procedures. Failure to observe these warnings, instructions and inspection
procedures could lead to serious injury or death. Training and instruction review should be repeated at regular intervals by
the user and his or her employer.
Double-check the intended function of any Klein connecting device before using it. Proper OPE system
applications are identified in the Klein OPE catalog and are printed clearly on the warning tags, labels and other literature provided
with each product. Misuse of a connecting device or any other piece of OPE equipment can result in serious injury or death.
It is imperative that qualified people select OPE system components to fit the specific job requirements.
Incorrect component choices can cause serious injury or death.
