VOM160
www.vishay.com
Vishay Semiconductors
Rev. 1.7, 18-Oct-12
1
Document Number: 81349
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototriac Output, Non-Zero Crossing,
0.5 kV/μs dV/dt, 600 V
DESCRIPTION
The VOM160 series phototriac consist a AlGaAs infrared
emitting diode (IRED) optically coupled to a photosensitive
non-zero crossing TRIAC packaged in a SOP-4 package. It
has a IRED trigger current of 5 mA, 7 mA, and 10 mA.
The VOM160 series phototriac isolate low-voltage logic
from 120 V
AC
, 240 V
AC
, and 380 V
AC
lines to control
resistive, inductive, or capacitive loads including motors,
solenoids, high current thyristors or TRIAC and relays.
FEATURES
• High static dV/dt > 0.5 kV/μs
• Input sensitivity I
FT
= 5 mA, 7 mA, and 10 mA
• On-state RMS current I
T(RMS)
= 70 mA
• 600 V peak off-state blocking voltage
• Isolation test voltage 3750 V
RMS
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Consumer appliances
• Triac drives
•Solid-state relays
• Motor controls
• Office equipment
AGENCY APPROVALS
• UL1577, file no. E52744, double protection
• cUL-file no. E52744, equivalent to CSA bulletin 5A
• VDE 0884-5, DIN EN 60747-5-5
• CQC: GB8898, GB4943
Notes
• For additional information on the available options refer to option information.
• The product is available only on tape and reel.
i179066
ORDERING INFORMATION
VOM1 6 0 XT
PART NUMBER
AGENCY CERTIFIED/PACKAGE TRIGGER CURRENT I
FT
UL, cUL, CQC 5 mA 7 mA 10 mA
SOP-4 VOM160NT VOM160PT VOM160RT
VDE, UL, cUL, CQC 5 mA 7 mA 10 mA
SOP-4 VOM160N-X001T VOM160P-X001T VOM160R-X001T