SPECIFICATION CONTROL DRAWING
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
TITLE:
SOLDERGRIP*
STUB SPLICE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: SGRP-X
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
15-Apr-11
DOC ISSUE:
6
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D981339
DCR NUMBER:
D020135
PROD. REV.:
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Ball Product Dimensions Copper Cross Section Bundle ø
Product
Name
Color
L3.5
(L0.140)
øA
øB
Min.
mm
2
(CMA)
Max.
mm
2
(CMA)
øD
max
M1
(M0.04)
SGRP-1 C Green 38.3
(1.510)
3.10.2
(0.1250.008)
26.02
(1.0250.079)
0.7 (1400) 2.4 (4800) 4.0
(0.160)
15
(0.590)
SGRP-2 C Red 37.7
(1.485)
3.90.2
(0.1550.008)
23.52
(0.9250.079)
2.0 (4000) 4.0(8000) 6.0
(0.235)
15
(0.590)
SGRP-3 D Blue 44.5
(1.750)
5.350.3
(0.2100.012)
25.53
(1.000.118)
3.5 (7000) 9.0(18000) 8.5
(0.335)
15
(0.590)
SGRP-4 D Yellow 45.5
(1.790)
7.150.3
(0.2800.012)
25.03
(0.9850.118)
7.5 (15000) 15.0(3000) 10.5
(0.410)
15
(0.590)
These products are tested to RB109.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn60 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. CONICAL SPRING: Square copper wire.
4. END CLOSURE BALL: Tinted glass. Color: see table.
APPLICATION
1. These controlled soldering devices are designed stub splicing of stranded wires with bare copper conductor having an insulation
rated for 85C minimum.
2. Temperature range: class 3A, -40C to +125C.
Vibration range: class 1 (body).
Seal range: class 0 (seal porous or no seal).
3. For installation procedure and application equipment
consult, RPIP-820-00.
For best results, prepare the cable as shown:
* A trademark of TE Connectivity
