CAB-14043

LIDAR‐LiteAccessoryCable

DEV-14043 RoHS

Description: This is the same accessory cable found in the LIDAR-Lite v3. The LIDAR-Lite

Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the

other. You can use this cable as a replacement to the one you are currently using, as a backup in

case of damage, or if you just need a second one.

The LIDAR-Lite Accessory Cable is 200mm (~7.8in) long with specific pin-outs found on the

second page of the Operation & Technical Manual below.

SparkFunElectronics®