ALUMINUM ELECTROLYTIC CAPACITORS
TMseries
Timer Circuit Use
Ideally suited for timer circuits.
Excellent leakage current stability, even subjected to load or no load at high temperature
for a long time.
Compliant to the RoHS directive (2002/95/EC).
Radial Lead Type
Dimensions
Type numbering system (Example : 10V 33
µ
F)
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem
–40 to +85°C
10 to 50V
1 to 470µF
±20% (M) (±10% (K) semi-standard) at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is 0.001CV+1 (µA) or less.
Printed with white color letter on black sleeve.
Measurement frequency : 120Hz
The specifications listed at right shall be met when
the capacitors are restored to 20
°C
after the rated
voltage is applied for 2000 hours at 85
°C.
After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-
4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Rated voltage (V)
tan δ (MAX.)
10
0.17
16
0.13
25
0.10
50
0.08
φD×L (mm)
TM
High
Stability
KL
Z–25°C / Z+20°C
Z–40°C / Z+20°C
Rated voltage (V)
Impedance ratio
ZT / Z20 (MAX.)
10
2
4
16
2
3
25
1.5
2
50
1.5
2
Capacitance change
Leakage current
tan δ
Within ±10% of the initial capacitance value
150% or less than the initial specified value
Less than or equal to the initial specified value
Measurement frequency : 120Hz at 20°C
1
2.2
3.3
4.7
10
22
33
47
100
220
330
470
010
2R2
3R3
4R7
100
220
330
470
101
221
331
471
6.3 × 11
8 × 11.5
8 × 11.5
10 × 16
10 × 20
12.5 × 25
12.5 ×25
1A
Cap.
(µF)
V
10
Code
6.3 × 11
8 × 11.5
10 × 12.5
10 × 12.5
10 × 20
12.5 × 25
16 × 25
16 × 25
1C
16
6.3 × 11
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 16
12.5 × 20
16 × 25
16 × 25
16 × 31.5
1E
25
6.3 × 11
6.3 × 11
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 31.5
1H
50
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
•
Please refer to page 20 about the end seal configulation.
Products which are scheduled to be discontinued.
Not recommended for new designs
CAT.8100B
