A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – MRX Reed Relays
www.standexmeder.com
Data Unit
1/2 sine wave duration 11ms
50 g
Resistance (max.)
20 g
-20 to 85 °C
-40 to 105 °C
Temperature (max.)
260 °C
*Load increase reduces life
expectancy of Reed Switches
Coil Data
Coil Voltage
(nom.)
Coil Resistance
(typ.)
Pull-In Voltage
(max.)
Drop-Out Voltage
(min.)
(typ.)
Form
Model
Unit VDC Ohm VDC VDC mW
1A
71
79*
05 360 3.8 1.0 70
12 305 9 2 110
24 5,880 18 3.5 100
2A
71
79**
05 250 3.8 1.0 100
12 890 9 2 260
24 1,000 18 3.5 165
4A 71 24 1,780 18 3.5 320
1C
90
05 360 3.8 1.0 70
12 305 9 2 110
24 5,880 18 3.5 100
-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C.
only available with Coil Voltage 12 ** 2A79 only available with Coil Voltage 24 ***1C21 only available with Coil Voltage 05 & 12
& Assembly Instructions
Switching inductive and/or capacitive loads create voltage
and/or current peaks, which may damage the relay.
Protective circuits need to be used.
External magnetic fields needs to be taken into
consideration, including a too high packing density. This may
influence the relays’ electrical characteristics.
Mechanical shock impacts e.g. dropping the relays may cause
immediate or post-installation failure.
Wave soldering: maximum 260°/5 seconds.
Reflow soldering: Recommendations given by the soldering
paste manufacturer need to be considered as well as the
temperature limits of other components/processes.
Modifications in the sense of technical progress are reserved.
Version 01
27.01.2015
USA: +1.866.782.6339 │ salesusa@standexmeder.com
Europe: +49.7731.8399.0 │ info@standexmeder.com
Asia: +86.21.37820625 │ salesasia@standexmeder.com