HC-EMV-KV-M25(9-16,5) Order No.: 1690516
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1690516
PHOENIX CONTACT Deutschland GmbH Page 2 / 4
http://www.phoenixcontact.de Jan 27, 2011
Thread type connection side 1 M25
Length of the connecting thread 7.50 mm
External cable diameter 9 mm ... 16.5 mm
Conductor sealing range 9.00 mm ... 16.50 mm
Tightening torque, union nut 10.00 Nm
Degree of protection IP68, to 5 bar
Ambient temperature (operation) -20 °C ... 100 °C
Certificates / Approvals
Certification GOST
Diagrams/Drawings
Functional drawing
Assembly instructions:
Method 1
Slit the outer sheath after approximately 15 mm, but do not
remove it. Guide the cable through the screw connection and
then remove the outer sheath. Now withdraw the cable until a
connection is established between the conductor shield and the
contact spring.
Method 2
Push the braided shield back approximately 15 - 20 mm over
the outer sheath. Insert the cable into the screw connection
until a connection is established between the conductor shield
and the contact spring.
Method 3
Uncover about 10 mm of the braided shield and guide the cable
through the screw connection until a connection is established
between the conductor shield and the contact spring.