1-557958-6

Instruction Sheet
408--10066
Cable Assembly with
LOC B
1 of 2
E2010 Tyco Electronics Corporation, Berwyn, PA
All Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
27 APR 10 Rev CPower Strip 557958- [ ]
To obtain information on AMP NETCONNECT*
products, call PRODUCT INFORMATION at
the number at the bottom of this page, or visit
the AMP NETCONNECT website at
www.ampnetconnect.com.
Power Strip Assembly 557958--1, 557958--2, 557958--3, and 557958--4
(See Figure 2 for “L” Dimensions)
A
L2
S(7Plc)
W
L1
Wrap--Around Mounting Bracket
PART
NUMBER
QTY--TYPE
OF REC
MIN--MAX CABLE
LENGTH D IM
SPACING
OF REC
PROTECTED
LINE NO.
557958--1 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 1
557958--2 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 2
557958--3 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 3
557958--4 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 4
1--557958--1 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 200.03 [7.875] 1
1--557958--2 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 200.03 [7.875] 2
1--557958--3 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 200.03 [7.875] 3
1--557958--4 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 200.03 [7.875] 1
1--557958--5 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 200.03 [7.875] 2
1--557958--6 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 200.03 [7.875] 3
1--557958--7 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 1
1--557958--8 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 2
1--557958--9 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 3
Figure 1
1. INTRODUCTION
This instruction sheet provides the mounting
procedures for the Cable Assembly Power Strip Kits
(557958--[ ]) shown in Figure 1 and Figure 2.
This cable assembly power strip kit is ideal for use in
garages, workshops, office areas, and display areas
where power is required for tools and appliances.
All dimensions are in metric units [with U.S.
customary units in brackets]. Figures and
illustrations are for reference only, and are not
drawn to scale.
2. DESCRIPTION
This cable assembly power strip is designed to be
mounted vertically or horizontally. The installation
should be on a surface that will minimize foreign
objects or liquids from entering the receptacle(s). It is
recommended that the power strip be mounted on a
surface other than a work surface.
ThecableassemblypowerstripisULListedinUL
File E132626.
Electrical Ratings:
20 Ampere Rated Units -- 120 VAC, 20 A, 2400 W atts
NOTE
i
408- 10066
Cable Assembly with Power Strip 557958- [ ]
Rev C2 of 2 Tyco Electronics Corporation
Po
w
e
r
S
t
r
i
p
A
s
s
em
b
l
1--557958--1, 1--557958--
2
, 1--557958--
3
,
a
n
d
1--557958--4
1--557958--5, 1--557958--6, 1--557958--7, 1--557958--8, and 1--557958--9
Clamp Bracket
A
L2
S(5Plc)
L1
W
PART
NUMBER
QTY -- TYPE OF
RECEPTACLE
CABLE ASSY POWER STRIP DIMENSIONS
LENGTH1 / LENGTH2 / WIDTH / HEIGHT
MOUNTING BRACKET
TYPE
557958--1 3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62]
557958--2
8
1
5
A
S
i
m
p
l
e
x
3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62]
Wra
p
--
A
round
557958--3
8--15
A
S
i
mp
l
ex
3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62]
W
r
a
p
A
r
o
u
n
d
Mounting Bracket
557958--4 3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62]
g
1--557958--1 2012.95 [79.25] / 1098.55 [43.25] / 37.59 [1.48] / 27.43 [1.08]
1--557958--2 2012.95 [79.25] / 1098.55 [43.25] / 37.59 [1.48] / 27.43 [1.08]
1--557958--3 2012.95 [79.25] / 1098.55 [43.25] / 37.59 [1.48] / 27.43 [1.08]
1--557958--4 2774.95 [109.25] / 1098.00 [43.25] / 37.59 [1.49] / 27.43 [1.08]
1--557958--5
6--15/20A Simplex
2774.95 [109.25] / 1098.00 [43.25] / 37.59 [1.49] / 27.43 [1.08]
Clamp Bracket
1--557958--6
6
5
/
0
S
p
e
2774.95 [109.25] / 1098.00 [43.25] / 37.59 [1.49] / 27.43 [1.08]
C
a
p
a
c
e
t
1--557958--7 2489.20 [98.00] / 1117.60 [44.00] / 37.85 [1.49] / 27.43 [1.08]
1--557958--8 2489.20 [98.00] / 1117.60 [44.00] / 37.85 [1.49] / 27.43 [1.08]
1--557958--9 2489.20 [98.00] / 1117.60 [44.00] / 37.85 [1.49] / 27.43 [1.08]
Figure 2
To reduce the risk of external shock, use indoor in
dry locations only. Not for use in wet or damp
locations. Plug the unit into a grounded outlet
only.
Mounting devices shall be located no more than
121.9 cm [48 in.] apart.
3. MOUNTING PROCEDURES
1. Drill holes as required for the number of
mounting clips provided.
2. Secure the mounting clips to the mounting
surface with #8 or #10 flat--head screws, (customer
supplied), at a distance not to exceed 1/3 the
length of the power strip.
3. Position the power strip over the clips, and firmly
press to lock in.
4. To remove the power strip from the mounting
clips, grasp the body and slide until clear.
4. REVISION SUMMARY
S Updated document to corporate requirements
S Revised document to match document part
number revision
DANGER
NOTE
i

1-557958-6

Mfr. #:
Manufacturer:
TE Connectivity / AMP Connectors
Description:
DC Power Cords CA,L3,66"L,LPPS,6-15/20A REC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet