Instruction Sheet
408--10066
Cable Assembly with
LOC B
1 of 2
E2010 Tyco Electronics Corporation, Berwyn, PA
All Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
27 APR 10 Rev CPower Strip 557958- [ ]
To obtain information on AMP NETCONNECT*
products, call PRODUCT INFORMATION at
the number at the bottom of this page, or visit
the AMP NETCONNECT website at
www.ampnetconnect.com.
Power Strip Assembly 557958--1, 557958--2, 557958--3, and 557958--4
(See Figure 2 for “L” Dimensions)
A
L2
S(7Plc)
W
L1
Wrap--Around Mounting Bracket
PART
NUMBER
QTY--TYPE
OF REC
MIN--MAX CABLE
LENGTH D IM
SPACING
OF REC
PROTECTED
LINE NO.
557958--1 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 1
557958--2 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 2
557958--3 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 3
557958--4 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 4
1--557958--1 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 200.03 [7.875] 1
1--557958--2 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 200.03 [7.875] 2
1--557958--3 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 200.03 [7.875] 3
1--557958--4 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 200.03 [7.875] 1
1--557958--5 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 200.03 [7.875] 2
1--557958--6 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 200.03 [7.875] 3
1--557958--7 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 1
1--557958--8 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 2
1--557958--9 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 3
Figure 1
1. INTRODUCTION
This instruction sheet provides the mounting
procedures for the Cable Assembly Power Strip Kits
(557958--[ ]) shown in Figure 1 and Figure 2.
This cable assembly power strip kit is ideal for use in
garages, workshops, office areas, and display areas
where power is required for tools and appliances.
All dimensions are in metric units [with U.S.
customary units in brackets]. Figures and
illustrations are for reference only, and are not
drawn to scale.
2. DESCRIPTION
This cable assembly power strip is designed to be
mounted vertically or horizontally. The installation
should be on a surface that will minimize foreign
objects or liquids from entering the receptacle(s). It is
recommended that the power strip be mounted on a
surface other than a work surface.
ThecableassemblypowerstripisULListedinUL
File E132626.
Electrical Ratings:
20 Ampere Rated Units -- 120 VAC, 20 A, 2400 W atts
NOTE
i