Type 4 Mild Steel Wallmount Enclosure w/ Window
Eclipse Series
Hinge Door with Quarter Turn
Application
Designed to enclose electrical and/or electronic equipment in wallmount
applications where viewing of component operation is necessary while
maintaining protection ratings.
Impressive styling features like hidden hinges, attractive latching systems
make the Eclipse a suitable addition to any high-tech equipment
installation.
A wide range of sizes and practical accessories make this product line a
complete package.
Standards
UL 508 Type 3R, 4 and 12
CSA Type 3R, 4 and 12
Complies with
NEMA 3R, 4 and 12
IEC 60529, IP66
Construction
Formed 14 or 16 gauge steel.
Full view UV resistant polycarbonate window allow maximum viewing area
of inner panel.
Smooth, continuously welded seams ground smooth.
Door stiffeners are provided where required for increased strength and
rigidity - designed to also permit additional mounting options.
Formed lip on enclosure to exclude flowing liquids and contaminants.
Door latches feature the added safety of quarter turn slot requiring use of
tool for opening.
Doors may be easily removed for modifications and are interchangeable.
Seamless poured-in place gasket.
Collar studs provided for mounting inner panel.
Includes hardware kit with panel mounting nuts and sealing washers for
wall mounting holes.
Bonding stud provided on door and grounding stud installed in enclosure.
Hinges are constructed from 304 stainless steel.
Hinge pins are stainless steel.
Quarter turn latches are zinc diecast with black epoxy finish.
Finish
Cover and enclosure are phosphatized and finished with a recoatable
powder inside and out with choice of ANSI 61 smooth Gray (GY) or RAL7035
textured light gray (LG).
Accessories
Quality Products. Service Excellence.
