https://www.phoenixcontact.com/us/products/2805392
08/19/2014Page2/5
Type 2 surge protection plug-F-MS 2200/30 ST-2805392
Technical data
General
IEC test classification II
T2
EN type T2
SPD design Voltage-switching type
Mode of protection L-PE
Mounting type On base element
Color black
Housing material PA 6.6
Pollution degree 3
Distance between live and grounded parts 8 mm
Inflammability class according to UL 94 V-0
Type DIN rail module, two-section, divisible
Number of positions 1
Surge protection fault message Optical
Additional descriptions
Note
The F-MS 2200/30 ST protective plug is only to be used in connection with
VAL-MS 750/30 ST (2920256) in series connection. It is not designed to be
directly used on the mains voltage. Replacement plugs for use on product
VAL-MS 800/30-VF/FM (2805402).
V
SDC
> 2200 V
Protective circuit
Nominal frequency f
N
50 Hz
60 Hz
Residual current I
PE
≤ 3 µA
Nominal discharge current I
n
(8/20) µs
15 kA
Maximum discharge current I
max
(8/20) µs
30 kA
Short-circuit current rating I
SCCR
25 kA
Voltage protection level U
p
≤ 5 kV
Residual voltage U
res
≤ 0.4 kV (at I
n
)
≤ 0.25 kV (at 10 kA)
≤ 0.15 kV (at 5 kA)
≤ 0.1 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 5 kV
TOV behavior at U
T
1550 V AC (200 ms / withstand mode)
Response time t
A
≤ 100 ns
Connection data