Manometer click
Manometer click
IC/Module
HSCMAND060PA3A3
Honeywell HSCMAND060PA3A3
(http://sensing.honeywell.com/honeywell-
sensing-trustability-hsc-series-high-accuracy-
board-mount-pressure-sensors-50099148-a-
en.pdf?name=HSCMAND060PA3A3)
Interface I2C (SCL, SDA)
Power
supply
3.3V
Website www.mikroe.com/click/manometer
(http://www.mikroe.com/click/manometer)
Schematic also available in PDF (http://cdn-
docs.mikroe.com/images/6/62/Manometer_click_v10
1
2
3
4
5
6
7
8
9
0
1
2
Manometer click
From MikroElektonika Documentation
Manometer click carries a piezoresistive silicon pressure sensor – a Honeywell HSCMAND060PA3A3
module with industry-leading, extremely high accuracy of ±0.25%FSS BFSL. An absolute pressure
range from 0 to 60 PSI makes it suitable for a variety applications. Beyond the measurement range, the
sensor has a high burst pressure threshold, resulting in increased reliability. . Manometer click
communicates with the target board MCU through the mikroBUS™ I2C interface (SCL, SDA).
Manometer click uses a 3.3V power supply.
Features and usage notes
The sensor on Manometer click is a highly reliable
and robust unit. It's also fairly easy to use and
implement. It requires no calibration and it
compensates for environmental conditions by relying
on its internal temperature sensor.
The HSC Series is calibrated over the temperature
range of 0 °C to 50 °C (32 °F to 122 °F).
The temperature sensor can also be accessed
independently through the I2C interface.
The barbed port accepts 4.93 mm (0.19”) tubing
which connects directly (no special extensions
required).
Programming
The following code snippet shows how our library simplifies the usage of Manometer click.
#include "manometer_hw.h"
void main()
{
float pressure, temp;
int count =0;
TWI_Init( 100000 );
manometer_init( MANOMETER_ADDRESS_TYPE_3, 0, 60 );
pressure = manometer_get_pressure();
temp = manometer_get_temp( CELSIUS );
if( pressure >45&& temp >35 )
count++;
}
Code examples that demonstrate the usage of Manometer click with MikroElektronika hardware, written for mikroC for ARM, AVR, dsPIC, FT90x, PIC and
PIC32 are available on Libstock (http://libstock.mikroe.com/projects/view/1781/manometer-click).
Resources
- learn.mikroe.com tutorial about Manometer click (http://learn.mikroe.com/industrial-solution-pressures/)
- HSCMAND060PA3A3 data sheet (http://sensing.honeywell.com/honeywell-sensing-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-
50099148-a-en.pdf?name=HSCMAND060PA3A3)
- Manometer click examples on Libstock (http://libstock.mikroe.com/projects/view/1781/manometer-click)
- mikroBUS standard specifications (http://download.mikroe.com/documents/standards/mikrobus/mikrobus-standard-specification-v200.pdf)
Retrieved from "http://docs.mikroe.com/index.php?title=Manometer_click&oldid=365"
◾ This page was last modified on 13 June 2016, at 16:10.
◾ Content is available under Creative Commons Attribution unless otherwise noted.
6
15
201
http://docs.mikroe.com/index.php?title=Manometer_click&printable=yes
