PSA120 Characteristics
WWW.PHIHONG.COM
Input:
AC Input Voltage Rating
100 to 240V AC
AC Input Voltage Range
90 to 264V AC
AC Input Frequency
47 to 63Hz
Input Current
4.0A (RMS) at maximum load and 115V AC
2.0A (RMS) at maximum load and 230V AC
Leakage Current
3.5mA maximum at 264V AC
Inrush Current
30A for 115V AC at maximum load
60A for 230V AC at maximum load
(Cold start at ambient 25°C)
Hold-up Time
10mS minimum at maximum load and 115V AC
Output:
Efficiency
70% minimum at max load and 115V AC for 5V
75% minimum at max load and 115V AC for 12V
78% minimum at max load and 115V AC for 24V
Over-Voltage Protection
>120%
Over-Current Protection
Over-current protection, auto-restart
Short-Circuit Protection
Output can be shorted permanently without damage
Environmental:
Temperature
Operation 0 to 50°C
Non-operation -25 to +85°C
Humidity
Operation 10 to 95% non-condensing
Emissions
Conducted: FCC Class B
EN55022 Class B
Radiated: FCC Class A
EN55022 Class A
Immunity
EN55024 1998
EN61000-4-2 Level 3
EN61000-4-3 Level 2
EN61000-4-4 Level 3
EN61000-4-5 Level 3
EN61000-4-6 Level 2
EN61000-4-11
EN61000-3-2 Harmonic Class A
EN61000-3-3 Flicker
General:
Insulation Resistance
Input to Ground: 10M ohms minimum, 500V DC
Dielectric Withstand (Hi-pot) Test
Input to Output: 3000V AC for 1 minute, 10mA
Input to Ground: 1500V AC for 1 minute, 10mA
Switching Frequency
42KHz ±10%
MTBF (Full load, 30CFM and ambient 25°C)
150K hours minimum
AC Input Connector (Molex or Equivalent)
Input Header: Molex 09-65-2038 or equivalent
Mating: Moles 09-50-1031 or equivalent
DC Output Connector
Output header: Molex 09-65-2088 or equivalent
Mating: Molex 09-50-1081 or equivalent
