MKT1813447255

Type 418P Orange Drop
®
Round Profile
Polyester Film/Foil
Capacitors
Features
• Radial-lead. Round profile.
Non-inductively wound, extended
foil construction.
Ratings up to 1000 Volts DC.
Dissipation Factor:
0.75% Maximum @ 1 KHz, +25°C
Encapsulation:
Conformal coating of orange, flame
retardant epoxy. Meets UL94V-0
specifications.
Dielectric/Construction:
Polyester film, single section design.
Non-inductivelywound with extended
aluminum foil.
Specifications
Capacitance Range:
Capacitance Tolerance:
±5%, ±10%, ±20%
Voltage Ratings:
100 to 1000 Volts DC
Operating Temperature Range:
-55°C to +85°C (at full voltage)
Voltage Derating:
At +105°C, 70% of +85°C rating.
At +125°C, 50% of +85°C rating.
Lead W i re :
Tinned copper-clad steel,
.032 (0.8) diameter, #20 AWG
Insulation Resistance:
At +25°C:
At +85°C:
At +105°C:
At +125°C:
100,000 M for C .25 µF
25,000 M-µF for C > .25 µF
10,000 M for C .15 µ F
1,500 M-µF for C > .15 µF
1,500
M for C .17 µF
250 M-µF f o r C > .17 µF
200 M for C .13 µF
25 MF for C > .13 µF
.001 to 1.0 µF
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830
Type 418P, Orange Drop®, Polyester Film/Foil Capacitors
General Specifications
The Type 418P Orange Drop
®
is designed and manufactured for operation in a wide range of demanding envi-
ronments and applications. Type 418P capacitors are wound from the most reliable polyester film and alum-
inum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated
up to +125°C with proper derating.
The 418P series finds use in many commercial and industrial applications, from power supplies and audio
amplifiers to welding equipment and ultrasonics.
Operating Temperature Range:
The standard operating temperature range for
polyester film is -55°C to +85°C. The 418P
may be operated at full voltage within this
temperature range.
The 418P may be operated up to +105°C
provided the DC working voltage is reduced
to 70% of the +85°C rating (full rating), and
up to +125°C with a 50% reduction from the
+85°C rating (full rating).
For more specific details regarding operation
above +85°C please contact our design
engineering department.
The maximum operating temperature for the
418P polyester film capacitor is +125°C.
Dielectric Withstanding Voltage:
Units rated below 1000 VDC shall withstand a
DC potential of 250% of rated voltage applied
between terminals for not more than 5 seconds.
Units rated at 1000 VDC shall withstand a DC
potential of 200% of rated voltage applied between
terminals for not more than 5 seconds.
Lead Bend Test:
After 3 consecutive 180° bends. No damage.
Humidity Testing:
Units subjected to 95% relative humidity for 72
hours with no voltage applied at +75°C. After 4
hours of drying minimum product of insulation
resistance and capacitance shall be 5,000 M-µF
DC Voltage Life Test:
500 hours at +85°C at 150% of rated voltage. After
test; capacitance shall not have changed by more
than ±5% of initial value, insulation resistance shall
not have decreased by more than 50% of initial value
and dissipation factor shall not have increased to
more than 1.0%. In addition, there should be no
open or short circuits, and no sign of visible damage.
Typical Temperature Characteristics:
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830
Type 418P, Orange Drop®, Polyester Film/Foil Capacitors
Ordering/Part Number Information
418P
104
9
6
L
D
3
(XXXX)
A suffix may be added by
the factory to denote special
construction.
1 = 0.187 (4.7) ±0.030 (0.8)
2 = 0.250 (6.4) ±0.030 (0.8)
3 = 1.250 (32) Minimum
Custom lead lengths available upon request.
A = Straight Lead
B,F = Hairpin Crimp
D,G,H = Hockey Stick Crimp
Case Code See Standard Sizes/Ratings Table
D-C Voltage Rating Expressed in Hundreds of Volts
Capacitance Tolerance 0 = ±20%; 9 = ±10%; 5 = ±5%
Capacitance Expressed in Picofarads. The first two digits are the significant figures,
the third is the number of zeros following. (i.e. 104 = 100000 pF = .1 µF)
CDE Type Number Identifies the basic capacitor design.
Standard Marking Format
Sample Marking
on unit
CDE418P600V
104K
9810
CDE
418P
600V
104K
9810
Description
CDE Electronics identification
Type number
D-C Voltage rating, Volts
Capacitance and tolerance code
Weekly date code
(i.e. 10th week of 1998)
Tolerance codes
per EIA Standards
K
M
±5%
±10%
±20%
Lead Length
Terminal
J
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830
Type 418P, Orange Drop®, Polyester Film/Foil Capacitors

MKT1813447255

Mfr. #:
Manufacturer:
Vishay
Description:
Film Capacitors 0.47uF 250V 10%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union