LQH2MCN1R5M52L Datasheet LQH2MCN1R0M52L, LQH2MCN6R8M52L, LQH2MCN100M52L | P4-P6

SpecNo.JELF243A-0060K-01 P4/7

MURATA MFG.CO., LTD

Reference Only

9.4 Peeling off force of cover tape

Speed of Peeling off 300mm/min

Peeling off force

0.2 to 0.7N

(minimum value is typical)

9.5 Dimensions of Leader-tape, Trailer and Reel

There shall be leader-tape (cover tape) and trailer-tape (empty tape) as follows.

9.6 Marking for reel

Customer part number, MURATA part number, Inspection number(∗1), RoHS Marking(∗2), Quantity etc ･･･

∗1) <Expression of Inspection No.>

□□ OOOO ×××

(1) (2) (3)

(1) Factory Code

(2) Date First digit : Year / Last digit of year

Second digit : Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D

Third, Fourth digit : Day

(3) Serial No.

∗2) « Expression of RoHS Marking » ROHS – Y (△)

(1) (2)

(1)

RoHS regulation conformity parts.

(2) MURATA classification number

9.7 Marking for Outside package (corrugated paper box)

Customer name, Purchasing order number, Customer part number, MURATA part number,

RoHS marking(∗2), Quantity, etc ･･･

9.8. Specification of Outer Case

Outer Case Dimensions

(mm)

Standard Reel Quantity in Outer

Case (Reel)

W D H

186 186 93 5

∗Above Outer Case size is typical. It depends on a quantity of an order

10. Caution

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability

for the prevention of defects which might directly cause damage to the third party's life, body or property.

(1) Aircraft equipment (7) Traffic signal equipment

(2) Aerospace equipment

(8) Disaster prevention / crime prevention equipment

(3) Undersea equipment

(9) Data-processing equipment

(4) Power plant control equipment

(10) Applications of similar complexity and /or reliability requirements

(5) Medical equipment

to the applications listed in the above

(6) Transportation equipment (vehicles, trains, ships, etc.)

165 to 180 degree

Cover tape

Plastic tape

190 min

2.0±0.5

13.0±0.2

21.0±0.8

210 min

60±

13±1.4

180±

9±

(in mm)

Trailer : 160 min.

Direction of feed

Empty tape

Leader

Cover tape

Label

SpecNo.JELF243A-0060K-01 P5/7

MURATA MFG.CO., LTD

Reference Only

11. Notice

This product is designed for solder mounting. (Reflow soldering only)

Please consult us in advance for applying other mounting method such as conductive adhesive.

11.1 Land pattern designing (Reflow Soldering)

Recommended land pattern for reflow soldering is as follows:

It has been designed for Electric characteristics and solderability.

Please follow the recommended patterns. Otherwise, their performance which includes electrical performance or

solderability may be affected, or result to "position shift" in soldering process.

11.2 Flux, Solder

Flux

・Use rosin-based flux.

・Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value).

・Don’t use water-soluble flux.

Solder

・Use Sn-3.0Ag-0.5Cu solder

・Standard thickness of solder paste : 100μm to 150μm

Other flux (except above) Please contact us for details, then use.

11.3 soldering conditions (Reflow)

･ Pre-heating should be in such a way that the temperature difference between solder and product surface

is limited to 100°C max. Cooling into solvent after soldering also should be in such a way that the

temperature difference is limited to 100°C max.

Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of product quality.

･ Standard soldering profile and the limit soldering profile is as follows.

The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the

deterioration of product quality.

Standard Profile Limit Profile

Pre-heating 150～180°C 、90s±30s

Heating above 220°C、30s～60s above 230°C、60s max.

Peak temperature 245±3°C 260°C,10s

Cycle of reflow 2 times 2 times

Chip Coil

Solder Resist

Land

2.6

0.8

1.0

(in mm)

150

90s±30s

Time(s)

245℃±3℃

Temp.

(℃)

220℃

30s～60s

180

260℃

230℃

60s max

Limit Profile

Standard Profile

SpecNo.JELF243A-0060K-01 P6/7

MURATA MFG.CO., LTD

Reference Only

11.4 Reworking with soldering iron.

The following conditions must be strictly followed when using a soldering iron.

Pre-heating 150°C,1 min

∗Reworking should be limited to only once.

Tip temperature 350°C max.

Soldering iron output 80W max.

Tip diameter φ3mm max.

Soldering time 3 s max.

Times 1 time

Note :Do not directly touch the products with the tip of the soldering iron in order to prevent the

crack on the products due to the thermal shock.

11.5 Solder Volume

･ Solder shall be used not to be exceeded the upper limits as shown below.

･ Accordingly increasing the solder volume, the mechanical stress to Chip is also increased.

Exceeding solder volume may cause the failure of mechanical or electrical performance.

1/3T≦ t ≦T

(T: Lower flange thickness)

11.6 Product's location

The following shall be considered when designing and laying out P.C.B.’s.

(1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board.

［Products direction］

Products shall be located in the sideways

direction (Length:a<b) to the mechanical

stress.

(2) Products location on P.C.B. separation

Products (A,B,C,D) shall be located carefully

so that products are not subject to the

mechanical stress due to warping the board.

Because they may be subjected the mechanical

stress in order of A

>C>B ≅ D.

11.7 Cleaning Conditions

Products shall be cleaned on the following conditions. But, Products can be used without cleaning,too.

(1) Cleaning temperature shall be limited to 60°C max.(40°C max for IPA.)

(2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at the

mounted products and P.C.B.

Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 minutes max.

(3) Cleaner

1. Alternative cleaner



Isopropyl alcohol (IPA)

2. Aqueous agent



PINE ALPHA ST-100S

(4) There shall be no residual flux and residual cleaner after cleaning.

In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in

order to remove the cleaner.

(5) Other cleaning

Please contact us.

〈

Poor example

〉

〈

Good example

〉

Upper Limit

Recommendable

Seam

Slit

Length:a

P1-P3 P4-P6 P7-P7

LQH2MCN1R5M52L

Mfr. #:

Buy LQH2MCN1R5M52L

Manufacturer:

Description:

Fixed Inductors 1.5uH 20% 1MHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LQH2MCN1R5M52L

LQH2MCN1R5M52L

Products related to this Datasheet