EVAL-ADM3066EEB1Z Datasheet EVAL-ADM3066EEB1Z, EVAL-ADM3066EEBZ | P7-P9

EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z User Guide UG-1131

Rev. 0 | Page 7 of 9

15761-007

Figure 7. EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z Silkscreen

15761-008

Figure 8. EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z Component Side/Layer 1

15761-009

Figure 9. EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z Layer 2

15761-010

Figure 10. EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z Layer 3

15761-0

Figure 11. EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z Layer 4

UG-1131 EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z User Guide

Rev. 0 | Page 8 of 9

ORDERING INFORMATION

BILL OF MATERIALS

Table 2. EVAL-ADM3066EEBZ

Qty Reference Designator Description Supplier Part Number

2 C1, C6 Capacitor, 100 nF, 0805 Multicomp MCCA000274

3 C2, C4, C5 Capacitor, not placed/optional Not applicable Not applicable

2 C3, C7 Capacitor, 10 µF, Case B Kemet B45196H3106K209

8 A, B, DI, RO, A_GND, B_GND,

DI_GND, RO_GND

High speed test point, silver pin Not applicable 040/30P/LA/KP2 SILVER

2 DE,

Test point, yellow Vero Technologies 20-313140

1 GND Test point, black Vero Technologies 20-2137

1 DI_ SMA right angle jack Not applicable 5-1814400-1

1 J1 Two-way terminal block Lumberg KRM 02

2 J3, J5 Four-way terminal block Lumberg KRM 04

1 LK1 8-pin (4 × 2), 0.1" header and shorting

block

Harwin M20-9953646 and M7566-05

1 LK2 6-pin (3 × 2), 0.1" header and shorting

block

Harwin M20-9953646 and M7566-05

3 LK3, LK4, LK6 Jumper block, 2-pin, 0.1" spacing Harwin M20-9990246 and M7566-05

2 R1, R2 Resistor, not placed/optional Not applicable

1 R3 Resistor, 0 Ω, 0805 Vishay Draloric CRCW08050000Z0EA

2 RT1, RT2 Resistor, 120 Ω, 0805 Multicomp MC 0.1W 0805 1% 120R

1 U1 10-lead MSOP Analog Devices, Inc.

ADM3066EBRMZ

2 VCC, VIO Test point, red Vero Technologies 20-313137

Table 3. EVAL-ADM3066EEB1Z

Qty Reference Designator Description Supplier Part Number

2 C1, C6 Capacitor, 100 nF, 0805 Multicomp MCCA000274

3 C2, C4, C5 Capacitor, not placed/optional Not applicable Not applicable

2 C3, C7 Capacitor, 10 µF, Case B Kemet B45196H3106K209

8 A, B, DI, RO, A_GND,

B_GND, DI_GND, RO_GND

High speed test point, silver pin Not applicable 040/30P/LA/KP2 SILVER

2 DE,

Test point, yellow Vero Technologies 20-313140

1 GND Test point, black Vero Technologies 20-2137

1 DI_ SMA right angle jack Not applicable 5-1814400-1

1 J1 Two-way terminal block Lumberg KRM 02

2 J3, J5 Four-way terminal block Lumberg KRM 04

1 LK1 8-pin (4 × 2), 0.1" header and

shorting block

Harwin M20-9953646 and M7566-05

1 LK2 6-pin (3 × 2), 0.1" header and

shorting block

Harwin M20-9953646 and M7566-05

3 LK3, LK4, LK6 Jumper block, 2-pin, 0.1" spacing Harwin M20-9990246 and M7566-05

2 R1, R2 Resistor, not placed/optional Not applicable

1 R3 Resistor, 0 Ω, 0805 Vishay Draloric CRCW08050000Z0EA

2 RT1, RT2 Resistor, 120 Ω, 0805 Multicomp MC 0.1W 0805 1% 120R

1 U1 10-lead LFCSP Analog Devices, Inc.

ADM3066EBCPZ

2 VCC, VIO Test point, red Vero Technologies 20-313137

EVAL-ADM3066EEBZ/EVAL-ADM3066EEB1Z User Guide UG-1131

Rev. 0 | Page 9 of 9

RELATED LINKS

Resource

Description

ADM3066E 3.0 V to 5.5 V, ±12 kV IEC ESD Protected, 50 Mbps RS-485 Transceiver

AN-960 RS-485/RS-422 Circuit Implementation Guide

Interface RS-485 and RS-422 RS-485/RS-422 Product Selection

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you

have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.

(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,

temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluat

ion Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term

“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be

considered the confidential and proprietary information of ADI. Customer may

not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to

promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any

occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.

Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice

to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO

WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED

TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL

PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF

THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE

AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable

United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of

Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby

submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

registered trademarks are the property of their respective owners.

UG15761-5/17(0)

P1-P3 P4-P6 P7-P9

EVAL-ADM3066EEB1Z

Mfr. #:

Buy EVAL-ADM3066EEB1Z

Manufacturer:

Analog Devices Inc.

Description:

ADM3066E EVAL BOARD W/LFCSP (1

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

EVAL-ADM3066EEB1Z

EVAL-ADM3066EEB1Z

Products related to this Datasheet