1.20 .047
1.60 .063
(4 PLC)
5.08 .200
5.08 .200
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
-HN: HEAVY GOLD/NICKEL (SEE NOTE 6 & 7)
(SMB7H-J-P-H-RA-TH1-PIN)
(SMB7H-J-P-F-RA-TH1-SHL)
(SMB7H-J-P-N-RA-TH1-BDY)
-H: HEAVY GOLD (SEE NOTE 6 & 7)
(SMB7H-J-P-H-RA-TH1-PIN)
(SMB7H-J-P-F-RA-TH1-SHL)
(SMB7H-J-P-F-RA-TH1-BDY)
GENDER
TYPE
PLATING
ORIENTATION
TERMINATION
-J: JACK
-P: PCB
-RA: RIGHT ANGLE
-TH1: THROUGH HOLE
SMB7H-J-P-XX-RA-TH1
DO NOT
SCALE FROM
THIS PRINT
SMB7H-J-P-H-RA-TH1
(SHOWN)
8.50
(REF)
.335
11.00 (REF)
.433
2.50
(REF)
.098
5.00 .197
0.96 .038
REF
"A"
"A"
0.98
±0.20
.039
±.008
3.45
±0.05
.136
±.002
TO INSULATOR
0.51 .020
REF
'B'
SECTION "A"-"A"
INSULATOR 1
(SMB7H-J-P-RA-TH1-INS1)
INSULATOR 1
(SMB7H-J-P-RA-TH1-INS2)
BODY
(SMB7H-J-P-X-RA-TH1-BDY)
PIN
(SMB7H-J-P-X-RA-TH1-PIN)
SHELL
(SMB7H-J-P-X-RA-TH1-SHL)
14.10 (REF)
.555
5.08
(REF)
.200
5.08
(REF)
.200
7.00
(REF)
.276
DETAIL 'B'
SCALE 16 : 1
FLUSH
0.10
RECOMMENDED MOUNTING HOLE
E
1.20 .047
1.60 .063
(4 PLC)
5.08 .200
5.08 .200
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
0.3 [.01] 2
.XX:
0.13 [.005]
.XXX:
0.051 [.0020]
MATERIAL:
SMB7 RIGHT ANGLE JACK- 75 OHM
BY:
SMB7H-J-P-XX-RA-TH1
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
G. HERMAN
03/25/2008
1
1
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\SMB7H-J-P-XX-RA-TH1-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
CONTACT, SHELL, BODY: BRASS
DIELECTRIC: PFTE
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. PUSHOUT FORCE FOR INSULATOR: 35.58 N [8.0 LB] MIN.
3. PUSHOUT FORCE FOR CENTER CONTACT: 17.79 N [4.0 LB] MIN.
4. PRODUCT TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.
5. RoHs COMPLIANT.
6. COMPONENT PLATING DESIGNATIONS:
-H: 0.00076[0.000030] (MIN) GOLD OVER 0.00127[0.000050] (MIN) NICKEL.
-F: 0.00008[0.000003] (MIN) GOLD OVER 0.00127[0.000050] (MIN) NICKEL.
-N: 0.00254[0.000100] (MIN) NICKEL.
7. ASSEMBLY PLATING DESIGNATIONS:
-HN: (CENTER CONTACT)-H:
(OUTER CONTACT)-F:
(REMAINING METAL PARTS)-N:
-H: (CENTER CONTACT)-H:
(OUTER CONTACT)-F:
(REMAINING METAL PARTS)-F:
REVISION E
