SPECIFICATION
Input Voltage
o 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
Audio & Video
o Allows you to extract audio signals from HDMI of your Raspberry Pi
o Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
o The SPDIF optical or coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH
audio
o Extracts digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA
style L/R analog output or earphone jack
o Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
o Maintains surround format when converting to digital optical audio
o Supports high definition input up to 1080p@ (24/60) Hz, output resolution follows input
o Supports HDMI signal amplification and equalization output for repeater function
o HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
SATA
o Allows you to connect SATA devices to your Raspberry Pi
Wireless
o Built in IR sensor (38KHz)
Misc
o Power output socket
o Directly connected on top of the Raspberry Pi using the board GPIO header pins
o Solderless and no wires required
o Extra 40-pin header of the R-Pi in order to support existing expansion boards
o Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
Dimensions
o 85 x 56mm (Same size as Raspberry Pi)
SHIPPING LIST
X600 expansion board x1
Nylon spacers (M3 x 20mm) x4
Nylon screws (M3 x 6mm) x8
USB adapter x1
HDMI adapter x1
Powered By DFRobot © 2008-2017 https://www.dfrobot.com/product-1515.html 5-2-17