OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EB01-FS225R12KE3

P1-P3P4-P5
EB01-FS225R12KE3
IGBT-Driver.com Page 1
Data Sheet EB01-FS225R12KE3
Basic Board for Infineon EconoPACK+
Modules FS225R12KE3
Abstract
The EB01-FS225R12KE3 is a basic board to be used with six-channel driver 6SD312EI
for reliable driving and safe operation of Infineon IGBT modules FS225R12KE3.
The basic board EB01-FS225R12KE3 (with driver 6SD312EI) is fully matched to IGBT
module FS225R12KE3. Its plug-and-play capability makes it ready to operate
immediately after mounting. The user needs invest no effort in designing or adjusting it
to a specific application.
Product Highlights Applications
Plug-and-play solution Three-phase inverters
Suitable for FS225R12KE3 Motor drives
No electrolytic capacitors UPS
Extremely reliable; long service life Power-factor correctors
Shortens application development time Wind-power converters
Welding
SMPS
and many others
EB01-FS225R12KE3
Basic Board Data Sheet
Page 2 CT-Concept.com
Important: Please refer to the relevant manuals!
This data sheet contains only product-specific data for the basic board.
Information specific to the relevant driver can be found in the
corresponding data sheet.
A detailed description, must-read application notes and general data
applicable to this driver family are found in: “Description and Application
Manual, Six-Channel Driver 6SD312EI for the EconoPACK+ Modules ”.
Dimensions
Dimensions: 162 x 100 mm.
Height including driver: 21 mm (30 mm with connector X1 and flat cable).
Mounting principle: soldered onto an EconoPACK+ IGBT module FS225R12KE3.
Absolute Maximum Ratings
Parameter Remarks Min Max Units
Input power per channel Note 1 3 W
Switching frequency Note 2 45 kHz
DC link voltage Note 3 800 V
Operating temperature -40 +85 °C
Storage temperature -40 +90 °C
All data refer to +25°C unless otherwise specified
EB01-FS225R12KE3
Basic Board Data Sheet
IGBT-Driver.com Page 3
Electrical Characteristics
Short-circuit protection Remarks Min Typ. Max Units
V
ce
-monitoring threshold Betw. aux. terminals 3.4 V
Response time Note 4 10 µs
Gate output Remarks Min Typ. Max Units
Turn-on gate resistor R
g(on)
3.2 Ω
Turn-off gate resistor R
g(off)
10 Ω
Electrical insulation Test conditions Min Typ. Max Units
Creep path between channels 9 mm
All data refer to +25°C unless otherwise specified
Footnotes to the key data
1) The input power is limited by the on-board gate resistors.
2) If the specified max. switching frequency is exceeded, the gate resistors may overheat.
3) This limit is due to active clamping. Refer to the “Description and Application Manual, Six-Channel
Driver 6SD312EI for the EconoPACK+ Modules”.
4) Pulse width of the direct output of the gate drive unit (excluding the gate-resistor delay).
P1-P3P4-P5

EB01-FS225R12KE3

Mfr. #:
Buy EB01-FS225R12KE3
Manufacturer:
Power Integrations
Description:
Power Management IC Development Tools IGBT Driver HVIC PI Gate Driver ONLY
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet