APC18T12-9L

POWER
APC18
75 Watts
Total Power: 75 Watts
Input Voltages: 10.0 - 14.0 V
# of Outputs: Single
SPECIAL FEATURES
Point-of-load (POL) applications)
High current slew rate at 2.5 A / μS
1
Open frame SMT
High efciency, 3.3 V @ 92% typical
Adjustable output through external
resistor programming
-40 °C to +85 °C ambient operating
temperature
UVLO protection
Positive Enable function
Low output ripple and noise
Regulation to zero load
SAFETY
UL/cUL 60950 Recognized
TÜV EN60950 Licensed
Electrical Specications
Input
Input voltage ra nge 10.0 = 14.0 V
Input surge 15 V
Efficiency 3.3 V @ 92% typical
Control
Enable TTL compatible (positive enable
Output
Regulation (line, Load, Temp) <3%
Load current 18 A max
Ripple and noise
1
50 mV
Output adjust range 0.75 V - 5.5 V
Current slew rate up to 2.5 A / μS
Transient response
1
3% typical deviation (for 5 Vo) for 50% to 75% step load
200 μS recovery
Remote sense 10% of Vo
Turn on input voltage 10 V (typical)
UVLO hysteresis 1 V (typical)
OCP/OTP Hiccup - auto recovery
Isolation Non-isolated module
Data Sheet
APC18 Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
www.artesyn.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use
of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc.
All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective
owners. © 2015 Artesyn Embedded Technologies, Inc.
Ordering Information
Model Number Input Voltage Output Voltage Output Current Efficiency (Typical)
APC18T12-9(J)L 10.0 - 14.0 V 0.75 - 5.50 Vdc 18 A 92%
Note:
18 A max output current with total output power limited to 75 W - minimal output derating required
Typical efficiency for 3.3 V output; full load; noiminal inut voltage; 200 LFM at Ta = 25 °C
Sufx “J” designates tray packaging, non “J” is tape and reel
Environmental Specications
Operating temperature -40 °C to +85 °C
Storage temperature -40 °C to +125 °C
MTBF 1 million hours
Notes:
1. 200 uF and 2x 150uF input and output capacitance required.
2. All specifications are typical at nominal line, full load and 25°C ambient
temperature unless otherwise noted.
3. All specifications subject to change without notice. Mechanical drawings are for
reference only.
4. Technical Reference Notes should be consulted for detailed information
5. Warranty: One year
Mechanical Drawings
PIN SIDE DOWN VIEW
Recommended PAD Layout
PAD Size
MIN: 1.6 x 2.8 mm [0.065 x 0.110 inches]
REC: 1.8 x 2.8 mm [0.070 x 0.110 inches]
MAX: 2.0 x 3.0 mm [0.080 x 0.130 inches]
GND VO TRIM SENSE
PIN SIDE UP VIEW
VIN ENABLE
APC18-12V 11May2015

APC18T12-9L

Mfr. #:
Manufacturer:
Artesyn Embedded Technologies
Description:
Non-Isolated DC/DC Converters 75W 0.75V@18A 10.8-14Vin
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet