STEVAL-STLCS01V1 Datasheet STEVAL-STLCS01V1 | P1-P3

Features

•

Very compact module for motion, audio, environmental sensing and Bluetooth

low energy connectivity with a complete set of firmware examples

• Mobile connectivity via the ST BlueMS app, available for iOS™ and Android™

• Main components:

– STM32L476JG – 32-bit ultra-low-power MCU with Cortex

M4F

– LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope

– LSM303AGR – Ultra-compact high-performance eCompass module: ultra-

low power 3D accelerometer and 3D magnetometer

– LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital

output barometer

– MP34DT05-A – 64 dB SNR digital MEMS microphone

– BlueNRG-MS – Bluetooth low energy network processor

– BALF-NRG-02D3 – 50 Ω balun with integrated harmonics filter

– LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V

• 2 V - 5.5 V power supply range

• External interfaces: UART, SPI, SAI (serial audio interface), I²C, DFSDM, USB

OTG, ADC, GPIOs

• Pluggable or solderable interface

• SWD interface for debugging and programming capability

• CE certified

• RoHS and China RoHS compliant

• WEEE compliant

• FCC certified

• IC certified

• TYPE certified

Description

The STEVAL-STLCS01V1 (SensorTile) is a highly integrated reference design that

can be plugged into form-factor prototypes, adding sensing and connectivity

capabilities to new designs through a smart hub solution. It can also easily support

development of monitoring and tracking applications like standalone sensor nodes

connected to iOS™ or Android™ smartphone applications.

The SensorTile occupies a very small 13.5 x 13.5 mm square outline, with all the

electronic components on the top side and a small connector on the bottom side to

plug it onto the cradle expansion board. The connector pinout is repeated on 18 PCB

pads to render the SensorTile a solderable system on module as well.

Refer to user manual UM2101 Getting started with the STEVAL-STLKT01V1

SensorTile integrated development platform for more information.

Product summary

SensorTile

connectable

sensor node

STEVAL-STLCS01V1

Ultra-low-power

microcontroller

with FPU ARM

Cortex-M4

STM32L476JG

Bluetooth low

energy network

processor

supporting

Bluetooth 4.1

core specification

BlueNRG-MS

MEMS audio

sensor

omnidirectional

digital

microphone

MP34DT05-A

SensorTile connectable sensor node: plug or solder

STEVAL-STLCS01V1

Data brief

DB2963 - Rev 3 - July 2018

For further information contact your local STMicroelectronics sales of

fice.

www.st.com

1 Block diagram

Figure 1. Functional block diagram

STEVAL-STLCS01V1

Block diagram

DB2963 - Rev 3

page 2/5

2 Regulatory approvals

The SensorTile module STEVAL-STLCS01V1 is marketed under the same FCC identifier (ID: S9NSTILE01) as

the SensorT

ile kit (code STEVAL-STLKT01V1) as a class I permissive change. The FCC ID S9NSTILE01 is a

limited modular approval as the module does not have RF shielding. The module was tested in the specific host

with model number STEVAL-STLCX01V1, belonging to the SensorTile kit (code STEVAL-STLKT01V1). When

integrated in a custom designed host other than the STEVAL-STLCX01V1, the SensorTile module STEVAL-

STLCS01V1 must be tested and FCC certified in the custom designed host.

The SensorTile module STEVAL-STLCS01V1 is IC certified with certification number IC: 8976C-STILE01 and

model number HVIN: STEVAL-STLCS01V1. Refer to the data brief of the SensorTile kit (code STEVAL-

STLKT01V1) for complete information on PMN, FVIN and HMN. The SensorTile module is certified as a limited

module because the modular transmitter does not have RF shielding. The module was tested in a representative

host with model number STEVAL-STILECX01V1, belonging to the SensorTile kit (code STEVAL-STLKT01V1).

When the SensorTile module is integrated into a different custom designed host, the developer of the host shall

perform additional radiated emission tests and satisfy technical and labeling requirements as per RSP100 section

3.2 http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html for IC certification.

The Bluetooth radio power output is set by default at 0 dBm. The FCC and IC certifications refer to this operating

value. The power output can be changed up to 8 dBm by reprogramming the device firmware, but the change of

this operating value will require an update of the FCC and IC certifications, with additional radio emission tests to

be performed..

STEVAL-STLCS01V1

Regulatory approvals

DB2963 - Rev 3

page 3/5

P1-P3 P4-P5

STEVAL-STLCS01V1

Mfr. #:

Buy STEVAL-STLCS01V1

Manufacturer:

STMicroelectronics

Description:

Multiple Function Sensor Development Tools SensorTile connectable sensor node: plug or solder

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

STEVAL-STLCS01V1