SRIX4K commands SRIX4K
38/47
Unique Identifier (UID)
Members of the SRIX4K family are uniquely identified by a 64-bit Unique Identifier (UID).
This is used for addressing each SRIX4K device uniquely after the anticollision loop. The
UID complies with ISO/IEC 15963 and ISO/IEC 7816-6. It is a read-only code, and
comprises (as summarized in Figure 50):
● an 8-bit prefix, with the most significant bits set to D0h
● an 8-bit IC manufacturer code (ISO/IEC 7816-6/AM1) set to 02h (for
STMicroelectronics)
● a 6-bit IC code set to 00 0011b = 3d for SRIX4K
● a 42-bit unique serial number
Figure 50. 64-bit unique identifier of the SRIX4K
Figure 51. Get_UID frame exchange between reader and SRIX4K
9.10 Power-on state
After power-on, the SRIX4K is in the following state:
● It is in the low-power state.
● It is in Ready state.
● It shows highest impedance with respect to the reader antenna field.
● It will not respond to any command except Initiate().
AI14082
D0h Unique Serial Number02h
63 55 47
0
Most significant bits Least significant bits
41
3d
S
O
F
CRC
L
CRC
H
E
O
F
AI07692b
Reader
SRIX4K
<-t
0
-><-t
1
->
S
O
F
CRC
L
CRC
H
E
O
F
0Bh
UID
1
UID
2
UID
3
UID
4
UID
0
UID
5
UID
6
UID
7