NTCALUG02A Series
www.vishay.com
Vishay BCcomponents
Revision: 08-Mar-17
1
Document Number: 29094
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTC Thermistors, Low Thermal Gradient Lug Sensors
Note
(1)
The thermal gradient is the difference per °C between the true
temperature of the surface to be sensed and the temperature
measured by the sensor
APPLICATIONS
Thermistors used for accurate surface temperature sensing
and control in:
• Computer equipment
• Power electronics, heat-sink temperature control
• Consumer appliances
• Industrial equipment
• Automotive equipment
MOUNTING
The device is suitable for screwing e.g. on a metal surface
through means of an M3 screw. The connections are
suitable for soldering on a PCB or for connector insertion.
The sensor is not suitable for being in permanent contact
with water or liquids.
FEATURES
• Low thermal gradient due to the use of nickel
conductor and low profile closed ring tongue
• AEC-Q200 qualified (grade 1)
• UL recognized, file E148885
(UL category XGPU2)
• Mounting: assembly screw mounting
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
Vishay thermistor chip NTC with epoxy coating and middle
buffer layer
(2)
mounted in a
(3)
metal ring lug with
(4)
PEEK
insulated leads AWG#30 (Ø 0.25 mm), mono-stranded
silver-plated nickel (insulation Ø 0.56 mm).
DESIGNERS TOOL
• NTC thermistor RT curve computation is available at:
www.vishay.com/thermistors/ntc-curve-list/
• Other applicable screw hole sizes are available, for
example M4 or American Stud #8
• 3D or 2D solid models are available
Refer to www.vishay.com/doc?29106
• Other R/T-curves and tolerances available on request
• Other lead length, insulation or connector crimping
available on request
• AWG#28 or AWG#26 wires available on request
Note
(1)
Is also known under material number NTCALUGE4C90294
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Resistance value at 25 °C 4.7K to 100K
Tolerance on R
25
-value ± 1; ± 2; ± 3 %
B
25/85
value 3435 to 4190 K
Tolerance on B
25/85
-value ± 0.5; ± 1.0; ± 1.5 %
Operating temperature range at
zero power
-55 to +125 °C
Thermal time constant 5s
Dissipation factor 10 mW/K
Thermal gradient
(1)
< 0.05 K/K
Min. dielectric withstanding
voltage between terminals and lug
1500 V
AC
Climatic category
(LCT / UCT / days)
55 / 125 / 56
Weight 1.0 g
DIMENSIONS in millimeters
L
1
L
2
Ø D
1
Ø D
2
Ø D
3
L
3
T
45 ± 3 6 ± 1 3.7 8.5 4.1 16.8 0.8
D
1
D
2
T
L
3
L
1
L
2
90294 a
D
3
(4) (2)
(3)
ELECTRICAL DATA AND ORDERING INFORMATION
R
25
()
R
25
-TOL.
(± %)
B
25/85
(K)
B
25/85
-TOL.
(± %)
UL RECOGNIZED
(Y / N)
SAP MATERIAL AND
ORDERING NUMBER
4700 2 3984 0.5 N NTCALUG02A472G
4700 1 3984 0.5 N NTCALUG02A472F
5000 2 3984 0.5 Y NTCALUG02A502G
10 000 2 3984 0.5 Y NTCALUG02A103G
(1)
10 000 1 3984 0.5 Y NTCALUG02A103F
10 000 1 3435 1.0 Y NTCALUG02A103FL
100 000 3 4190 1.5 N NTCALUG02A104H