308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Device
Raychem Circuit Protection Products
PRODUCT: TS600-200-RA-B-0.5
DOCUMENT: SCD 24211
PCN: 045845, C02530
REV LETTER: J
REV DATE: MAY 8, 2007
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Max Electrical Rating at 20°C
Operating Voltage: 60V
DC
Interrupt Current: 3A
RMS
Fault Voltage: 600V
RMS
Terminal Material: Tin plated brass
Case Material: 1000 V Dielectric rating
TABLE I. DIMENSIONS:
A B C D E F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
mm: 18.29 19.43 11.56 12.32 7.24 8.26 1.65 2.41 9.91 10.41 1.52 2.29
in*: (0.720) (0.765) (0.455) (0.485) (0.285) (0.325) (0.065) (0.095) (0.390) (0.410) (0.060) (0.090)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS @ 20°C (unless otherwise noted):
IHOLD (A)
RESISTANCE (Ω) TIME TO TRIP(s)
@ 1A
OPERATING
Temperature (°C)
Power
Dissipation
20°C 70°C R MIN R MAX R
1
Inst* R
1
MAX** TYP MIN MAX Watts, Typical
0.200 0.110 4.0 7.5 13.5 13.5 12 -40 85 2.5
*Post Reflow Resistance, measured after one hour.
**Maximum device resistance at 20°C measured 1 hour post trip.
Resistance Matched
0.5 Ohm
Agency Recognition: CSA, UL Recognition file #E74889
Reference Documents: PS300
Precedence: This specification takes precedence over documents referenced herein.
Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
© 2006, 2007 Tyco Electronics Corporation. All rights reserved.
Marking:
Raychem Logo
Lot Identification
Part Identification
T20
