SFP 1-20/120AC Order No.: 2856702
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2856702
PHOENIX CONTACT Inc., USA Page 4 / 7
http://www.phoenixcon.com Dec 6, 2011
Conductor cross section stranded max. 4 mm²
Conductor cross section solid min. 4 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section AWG/kcmil min. 12
Conductor cross section AWG/kcmil max 10
Remote indicator contact
Connection name Remote fault indicator contact
Switching function PDT contact
Connection method Pluggable screw connection
Screw thread M2
Tightening torque 0.25 Nm
Stripping length 7 mm
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 1.5 mm²
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section AWG/kcmil min. 28
Conductor cross section AWG/kcmil max 16
Maximum operating voltage U
max.
AC 250 V AC
Max. operating current I
max
1 A (250 V AC)
0.25 A (250 V DC)
1 A (48 V DC)
Min. permissible switching capacity (1.00 A / 48 V DC)
(100 mA/ 12 V AC)
Switching capacity max. perm. (0.25 A / 250 V DC)
(1.0 A / 48 V AC)
Connection, protective circuit
Standards/regulations IEC 61643-1
EN 61643-11/A11
Protective circuit, filter
Discharge resistor ≤ 390 kΩ
Clamping voltage ringwave (L-N) 100 V (category A 100 kHz 6 kV/200 A)
195 V (category B 100 kHz 6 kV/500 A)
