TOWER SYSTEM Quick Start Guide for TWR-MCF51AG
Step-by-Step Installation Instructions
STEP
3
In this Quick Start Guide, you will learn how to set up the TWR-MCF51AG
module and run the default demonstration.
Install Software
and Tools
• InstallCodeWarriorDevelopment
Studio for Microcontrollers v6.3
(Evaluation version)
• InstallCodeWarriorDevelopment
Studio for Microcontrollers Service
Pack V6.3.1 (CWMCUV631.exe)
• InstallServicePackforMCF51AG128
Installintheorderlisted.Theseprograms
areincludedontheDVD.Lookunderthe
developmenttoolstabinyourDVD.For
updates, please visit freescale.com.
Connect the USB Cable
Connect one end of the USB
cable to the PC and the other end to the
mini-B connector on the TWR-MCF51AG
module. Allow the PC to automatically
configure the USB drivers if needed.
Run Quick Start
Application
After the board is powered on in Step
2,thedemocodeintheMCF51AG128
willbeginexecution.TheLEDs(1–4)will
illuminate in sequence.
To run more demonstrations with the
TWR-MCF51AGorTWR-MCF51AG-KIT,
follow the instructions in the
TWR-MCF51AG-LABdocument.
STEP
1
STEP
2
