OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TWR-MCF51AG

P1-P3P4-P4
TOWER SYSTEM
Jumper Default Setting Description
J6 1–2 MPR121interruptoutput,connecttoPTH5
J8 1–2 SDAlineofMPR121I
2
Cinterface,connecttoAG128IIC
J9 1–2 SCLlineofMPR121I
2
Cinterface,connecttoAG128IIC
J1 1–2 VREFH,shorttoVDDA
J2 1–2 VREFL,shorttoGND
J4 ALLON
(1–2,3–4,5–6,7–8)
Theaccelerometercontrolandstatussignal,connecttoGPIOofAG128
J5 1–2 AG128powersupply,canbeusedtomeasurethecurrentconsumed
byAG128
J12 2–3 RXDofSCI1,connecttoelevator(default)oron-boardRS232port
J13 2–3 TXDofSCI1,connecttoelevator(default)oron-boardRS232port
J14 1–2 TXDofSCI2,connecttotheserialportofOSBDMCPU
J16 Open OSBDMIRQpin(usedforupgradetheOSBDMbootloader)
J18 1–2 RXDofSCI2,connecttotheserialportofOSBDMCPU
J19 1–2 InterruptinputofAG128
J17 ALLON
(1–2,3–4,5–6,7–8)
LEDs1to4selection
J11 -- OSBDMMini-USBconnector
J15 -- RS232portconnector
J3 -- BDMportforMCF51AG
J7 -- BDMportforMC9S08JM60(OpenSourceBDM)
DIP-SW ALLOFF
(S1,S2,S3,S4)
Switchers,connecttotheGPIOportofAG128
Jumper Options
The following is a list of the default jumper settings on the TWR-MCF51AG module.
Freescale,theFreescalelogo,CodeWarrior,ColdFireandMQXare
trademarksofFreescaleSemiconductor,Inc.,Reg.U.S.Pat.Tm.
Off.Allotherproductorservicenamesarethepropertyoftheir
respectiveowners.©2010FreescaleSemiconductor,Inc.
DocNumber:TWRMCF51AGQSG/REV0
AgileNumber:926-78527/REVA
TolearnmoreabouttheTWR-MCF51AG128-KITandotherFreescaleapplianceproducts,
please visit freescale.com/MCF51AG, freescale.com/appliance or freescale.com/Tower.
P1-P3P4-P4

TWR-MCF51AG

Mfr. #:
Buy TWR-MCF51AG
Manufacturer:
NXP Semiconductors
Description:
TOWER SYSTEM MCF51AG EVAL BRD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet