OMO ElectronicOMO Electronic
Expand menu
0 Cart

HET-AW-RLC-B

P1-P2
TRON
®
In-Line Fuseholders HET
Single-Pole for Solid Neutral Series
Form No. HET Series
Page 1 of 2
Data Sheet: 2125
Bussmann
®
Catalog and Specification Data - Non-Breakaway
Conductor Terminals
Conductors Catalog
Terminal Type Size Symbol
Load &
Line
(2 & 3)
Copper Crimp #12 to #8 1 • •
A
#12 2 • •
#10 2 • •
#6 1 • • B
#4 1 • •
Copper Set-Screw
#12 to #3 1 • • J
#12 to #2 2 • • K
Aluminum Set-Screw
#12 to #2 1 • • L
Catalog Data — Insulating Boots
Catalog
Numbers Type
2A0660 Single Conductor
2A0661 Two Conductor
Insulating boots are not included with non-breakaway parts
and must be ordered separately. They come standard with
the breakaway series. The HET-AW & HET-JW do not have
the boots. These catalog items do not have a breakaway recep-
tacle.
When boots are utilized, extra heat retention requires that fuses
are sized at a minimum of 200% of the RMS load current.
Non-Breakaway Holders
Catalog Symbol: HET-AA, HET-AB, HET-BB, HET-JJ, and
HET-JK
In-Line Fuseholders, Single-Pole
Water-Resistant
For breakaway holders, see page 2
HET — A HEB fuseholder with a permanently installed solid
neutral. Easily identified by white plastic coupling nut.
Example:
A single-pole, in-line holder for a neutral is required. One solid
copper #8 is on the load side, copper crimp for connection. A
solid copper #6 is on the line side, and a copper crimp is
required.
1. Choose HET- series.
2. Choose “A” for load side.
3. Choose “B” for line side.
Complete Catalog Number: HET-AB.
No. Per
Terminal
Solid
Stranded
Ordering Information:
Load Line
Terminal Terminal
Recommended Torque on Coupling Nut: 10-20 in-lb.
HET
7-16-03
N03082
TRON
®
In-Line Fuseholders HET
Single-Pole for Solid Neutral Series
Form No. HET Series
Page 2 of 2
Data Sheet: 2125
Bussmann
®
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Breakaway Holders
Catalog Symbol: HET-AW-RLC-A, HET-AW-RLC-B,
HET-AW-RLC-C, HET-AW-RLC-J, HET-AW-RYC,
HET-BW-RLC-B, HET-BW-RYC, HET-JW, HET-JW-RLC-J,
HET-JW-RYC, and HET-AW
In-Line Fuseholders, Single-Pole
Example:
A single-pole, in-line, breakaway holder for a neutral is
requested. A single #10 solid, copper crimp is on the load
side. A single #10, solid wire and a copper crimp is needed
on the line side.
1. Choose HET- series.
2. Choose “A” from 1st page for load side.
3. Choose “W” for breakaway requirement.
4. Choose “RLC-A” for breakaway receptacle on line side.
Complete Catalog Number: HET-AW-RLC-A
Recommended Torque on Coupling Nut: 10-20 in-lb.
Catalog and Specification Data
Breakaway Receptacles
Conductor Data Catalog
Terminal Type Size Symbol
Line
Terminal
(3)
Copper Crimp #12 to #8 1 • • -RLC-A
#6 1 • • -RLC-B
#4 1 • • -RLC-C
Copper Set-Screw
#12 to #3 1 • • -RLC-J
#12 to #3 2 • • -RYC
Solid Breakaway
(Required with W
breakaway
Receptacle)
No. Per
Terminal
Solid
Stranded
Ordering Information:
Load Line
Terminal Terminal
W
HET
7-16-03
N03082
P1-P2

HET-AW-RLC-B

Mfr. #:
Buy HET-AW-RLC-B
Manufacturer:
Bussmann / Eaton
Description:
Fuse Holder In-Line Tron
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet