MAL218297003E3

182 CPHZ
www.vishay.com
Vishay BCcomponents
Revision: 22-Sep-17
4
Document Number: 28433
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Unless otherwise specified, all electrical values in Table 5 apply
at T
amb
= 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ORDERING EXAMPLE
Hybrid conductive polymer 182 CPHZ series
100 μF / 25 V; ± 20 %
Nominal case size: 6.3 mm x 6.3 mm x 7.7 mm;
taped on reel
Ordering code: MAL218297603E3
Table 5
Table 6
ELECTRICAL DATA
SYMBOL DESCRIPTION
C
R
Rated capacitance at 120 Hz, tolerance ± 20 %
I
R
105 °C Rated RMS ripple current at 100 kHz
I
L2
Max. leakage current after 2 min at U
R
tan Max. dissipation factor at 120 Hz
ESR Max. ESR at 100 kHz
ELECTRICAL DATA AND ORDERING INFORMATION
U
R
(V)
C
R
(μF)
NOMINAL
CASE SIZE
L x W x H
(mm)
I
R
105 °C
100 kHz
(mA)
I
L2
2 min
(μA)
tan
120 Hz
ESR
100 kHz
20 °C
(m)
ORDERING CODE
MAL2182...
25
33 5.0 x 5.0 x 5.8 900 8.3 0.14 80 97601E3
56 6.3 x 6.3 x 5.8 1300 14 0.14 50 97602E3
100 6.3 x 6.3 x 7.7 2000 25 0.14 30 97603E3
220 8.0 x 8.0 x 10.5 2300 55 0.14 27 97604E3
330 10.0 x 10.0 x 10.5 2500 82.5 0.14 20 97605E3
35
22 5.0 x 5.0 x 5.8 900 7.7 0.12 100 97001E3
27 6.3 x 6.3 x 5.8 1300 9.5 0.12 60 97002E3
47 6.3 x 6.3 x 5.8 1300 16.5 0.12 60 97003E3
68 6.3 x 6.3 x 7.7 2000 23.8 0.12 35 97004E3
150 8.0 x 8.0 x 10.5 2300 52.5 0.12 27 97005E3
270 10.0 x 10.0 x 10.5 2500 94.5 0.12 20 97006E3
50
10 5.0 x 5.0 x 5.8 750 5 0.1 120 97101E3
22 6.3 x 6.3 x 5.8 1100 11 0.1 80 97102E3
33 6.3 x 6.3 x 7.7 1600 16.5 0.1 40 97103E3
68 8.0 x 8.0 x 10.5 1800 34 0.1 30 97104E3
100 10.0 x 10.0 x 10.5 2000 50 0.1 28 97105E3
63
10 6.3 x 6.3 x 5.8 1000 6.3 0.08 120 97801E3
22 6.3 x 6.3 x 7.7 1500 13.9 0.08 80 97802E3
33 8.0 x 8.0 x 10.5 1700 20.8 0.08 40 97803E3
56 10.0 x 10.0 x 10.5 1800 35.3 0.08 30 97804E3
80
22 8.0 x 8.0 x 10.5 1550 17.6 0.08 45 97701E3
33 10.0 x 10.0 x 10.5 1700 26.4 0.08 36 97702E3
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods IEC 60384-25, subclause 4.14 U
s
1.15 x U
R
182 CPHZ
www.vishay.com
Vishay BCcomponents
Revision: 22-Sep-17
5
Document Number: 28433
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
USEFUL LIFE AND ENDURANCE
Table 7
Note
(1)
Identical with endurance for this series
Endurance can be calculated by formula below:
L: estimated lifetime (h)
L
Tmax.
: base lifetime specified at maximum operating temperature with applied DC voltage (h)
T
max.
: rated maximum operating temperature (°C)
T
a
: actual ambient temperature (°C)
Table 8
Table 9
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
ENDURANCE TEST AND USEFUL LIFE
SERIES CASE CODE
USEFUL LIFE
AT 105 °C (h)
(1)
ENDURANCE
AT 105 °C (h)
ENDURANCE
AT 95 °C (h)
ENDURANCE
AT 85 °C (h)
ENDURANCE
AT 75 °C (h)
ENDURANCE
AT 65 °C (h)
182 CPHZ 0506 to 1010 10 000 10 000 20 000 40 000 80 000 160 000
MULTIPLIER OF RIPPLE CURRENT (I
R
) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
120 1000 10 000 100 000
I
R
MULTIPLIER
0.1 0.3 0.6 1
TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
NAME OF TEST REFERENCE
Mounting IEC 60384-25,
subclause 4.3
Shall be performed prior to tests mentioned below;
reflow soldering;
for maximum temperature load
refer to chapter “Mounting”
C/C: ± 5 %
tan spec. limit
I
L2
spec. limit
Endurance IEC 60384-25 /
CECC 32300,
subclause 4.15
T
amb
= 105 °C; U
R
applied;
for test duration see Table 7
C/C: ± 30 %
tan 2 x spec. limit
I
L2
spec. limit
ESR 2 x spec. limit
Useful life CECC 30301,
subclause 1.8.1
T
amb
= 105 °C; U
R
and I
R
applied;
for test duration see Table 7
C/C: ± 30 %
tan 2 x spec. limit
I
L2
spec. limit
ESR 2 x spec. limit
Shelf life
(storage at high
temperature)
IEC 60384-25 /
CECC 32300,
subclause 4.16
T
amb
= 105 °C; no voltage applied;
1000 h
after test: U
R
to be applied for 30 min,
24 h to 48 h before measurement
For requirements
see “Endurance test” above
LL
Tmax.
x 2
T
max.
- T
a
10
-------------------------
=

MAL218297003E3

Mfr. #:
Manufacturer:
Vishay
Description:
CAP, 47F, 35V, 20%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union