Type 1 Mild Steel Component Case
1416 Series
Ventilated Cover with Screws
Application
Designed to provide mechanical protection for components requiring
ventilation.
Suitable for use where heat dissipation is required.
Standards
Complies with
NEMA Type 1
Construction
Base is formed from 16 gauge steel with two 0.5”/0.75” conduit knockouts
located in each end.
Four .125” high raised dimples with mounting holes are provided on the
base.
Cover is formed from 18 gauge steel with 0.235” x 1.5” ventilating slots
(0.199” x 1.12” on E & G only).
Screw holes and offsets in the cover allow easy assembly.
Finish
Base and cover are finished in ANSI 61 gray powder coating.
Quality Products. Service Excellence.