Datasheet for part number CA3101F16-11PF80
Our Catalog Part Number: CA3101F16-11P-F80
Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015
Product Datasheet
Thread Connector with threaded coupling
Shell Style Cable connecting plug
Endbell Style Endbell for flex tube
Gender Pin
Shell Size 16
Contact Arrangement 16-11
Number of contacts 2 contacts size 12
Contact Type AWG Crimp
Contact Plating Hard silver
Shielding no
Contact Rating at +20 °C (68 °F)
(Size 25/12)
41 A
Contact Resistance (Size 25/12) 3 mΩ
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 1600 Vrms
Air and Creepage Paths (Min) 1,1 mm
Ambient Temperature
Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions
IP67 acc. to DIN 40 050
(1 bar pressure after 12 hrs)
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact (Size 25/12) 1,5 N
Gage
For infos on Gage please see catalog
VG95234, part 1
Coupling Torque Closing: 5,5 Nm max / Opening: 0,46 Nm min
Contact Retention (Size 25/12) 55 N
Shell Material Aluminium alloy
Shell Plating Olive drab chromate coating over cadmium plating
Insulator and Gromet Material Neoprene
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping (Size 25/12) 6,2 mm
General Info
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 1 of
