1. Product profile
1.1 General description
Small-size Low DropOut regulator (LDO) family with ultra high Power Supply Rejection
Ratio (PSRR) of 75 dB. The typical voltage drop is 250 mV at 150 mA current rating.
Operating voltages can range from 2.3 V to 5.5 V. The devices are available with fixed
nominal output voltages V
O(nom)
between 1.2 V and 3.6 V.
The LD6815TD/xxH devices show a high-ohmic state (3-state) at the output pin when set
to disabled mode. The LD6815TD/xxP devices contain a pull-down switching transistor to
provide a low-ohmic output state (auto discharge function) in disabled mode.
The LD6815 series devices are available in SOT753 (TSOP5) plastic package with a size
of 2.9 1.5 1.0 mm. All devices are manufactured in monolithic silicon technology.
1.2 Features and benefits
Overcurrent protection
Auto discharge or high-ohmic output stage available
Low quiescent current (0.1 A) in shutdown mode
High-level ElectroStatic Discharge (ESD) protection (6 kV Human Body Model (HBM))
Industry standard TSOP5 (SOT753) package
1.3 Applications
1.4 Quick reference data
LD6815 series
Low dropout regulators, high PSRR, 150 mA
Rev. 2 — 14 December 2012 Product data sheet
Smartphones Tablet PCs
Mobile handsets Mobile internet devices
Digital still cameras Portable media players
I
OUT
= 150 mA (max) V
IN
= 2.3 V to 5.5 V
PSRR = 75 dB at 1 kHz V
OUT
= 1.2 V to 3.6 V
RMS noise V
n(o)RMS
=40mV
at 10 Hz to 100 Hz
Dropout voltage V
do
= 250 mV
at I
OUT
=150mA
t
startup(reg)
=150s
LD6815_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 2 — 14 December 2012 2 of 20
NXP Semiconductors
LD6815 series
Low dropout regulators, high PSRR, 150 mA
2. Pinning information
2.1 Pinning
2.2 Pin description
3. Ordering information
Further ordering options see Section 3.1 “Ordering options.
3.1 Ordering options
Further information on output voltage is available on request; see Section 20Contact
information. An explanation of high-ohmic and pull-down type is in Section 4 “Block
diagram.
Fig 1. Pin configuration
132
45
Table 1. Pin description
Symbol Pin Description
IN 1 regulator input voltage
GND 2 supply ground
EN 3 device enable input; active HIGH
n.c. 4 not connected
OUT 5 regulator output voltage
Table 2. Ordering information
Type number Package
Name Description Version
LD6815 series TSOP5 plastic surface-mounted package; 5 eads SOT753
Table 3. Type number extension of high-ohmic output
Type number Nominal output
voltage V
O(nom)
Type number Nominal output
voltage V
O(nom)
LD6815TD/12H 1.2 V LD6815TD/28H 2.8 V
LD6815TD/15H 1.5 V LD6815TD/29H 2.9 V
LD6815TD/18H 1.8 V LD6815TD/30H 3.0 V
LD6815TD/21H 2.1 V LD6815TD/33H 3.3 V
LD6815TD/25H 2.5 V LD6815TD/36H 3.6 V
LD6815_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 2 — 14 December 2012 3 of 20
NXP Semiconductors
LD6815 series
Low dropout regulators, high PSRR, 150 mA
4. Block diagram
Table 4. Type number extension of pull-down output
Type number Nominal output
voltage V
O(nom)
Type number Nominal output
voltage V
O(nom)
LD6815TD/12P 1.2 V LD6815TD/28P 2.8 V
LD6815TD/15P 1.5 V LD6815TD/29P 2.9 V
LD6815TD/18P 1.8 V LD6815TD/30P 3.0 V
LD6815TD/21P 2.1 V LD6815TD/33P 3.3 V
LD6815TD/25P 2.5 V LD6815TD/36P 3.6 V
Fig 2. Block diagram of LD6815TD/xxP (auto discharge function)
Fig 3. Block diagram of LD6815TD/xxH
DDD
29(5&855(17
3527(&7,21
9
UHIHUHQFH
*(1(5$725
9
,1
9
287
*1'
5
5
9
(
1
(1$%/(6+87
'2:1&,5&8,7
DDD
29(5&855(17
3527(&7,21
(1$%/(6+87
'2:1&,5&8,7
9
UHIHUHQFH
*(1(5$725
9
,1
9
287
*1'
5
5
9
(
1

LD6815TD/12P,125

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
IC REG LINEAR 1.2V 150MA 5TSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union