HMC498LC4 Datasheet HMC498LC4TR, HMC498LC4, HMC498LC4TR-R5 | P4-P6

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

LINEAR & POWER AMPLIFIERS - SMT

HMC498LC4

v04.0514

GaAs PHEMT MEDIUM

POWER AMPLIFIER, 17 - 24 GHz

Outline Drawing

Absolute Maximum Ratings

Drain Bias Voltage (Vdd1, Vdd2, Vdd3) +5.5 Vdc

Gate Bias Voltage (Vgg) -4.0 to 0 Vdc

RF Input Power (RFIN)(Vdd = +5Vdc) +10 dBm

Channel Temperature 175 °C

Continuous Pdiss (T= 85 °C)

(derate 18 mW/°C above 85 °C)

1.62 W

Thermal Resistance

(channel to ground paddle)

55.6 °C/W

Storage Temperature -65 to +150 °C

Operating Temperature -40 to +85 °C

ESD Sensitivity (HBM) Class 1A

Vdd (Vdc) Idd (mA)

+4.5 239

+5.0 250

+5.5 262

Typical Supply Current vs. Vdd

Note: Amplier will operate over full voltage ranges shown

above. Vgg adjusted to achieve Idd= 250 mA at +5V.

NOTES:

1. PACKAGE BODY MATERIAL: ALUMINA.

2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.

3. DIMENSIONS ARE IN INCHES (MILLIMETERS).

4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK

LOCATED APPROX. AS SHOWN.

6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –

7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

Package Information

Part Number Package Body Material Lead Finish MSL Rating Package Marking

[2]

HMC498LC4 Alumina, White Gold over Nickel

MSL3

[1]

H498

XXXX

[1] Max peak reow temperature of 260 °C

[2] 4-Digit lot number XXXX

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

LINEAR & POWER AMPLIFIERS - SMT

HMC498LC4

v04.0514

GaAs PHEMT MEDIUM

POWER AMPLIFIER, 17 - 24 GHz

Pin Descriptions

Application Circuit

Pin Number Function Description Interface Schematic

1, 5 - 8, 10 - 14,

18, 20, 22, 24

N/C

These pins are not connected internally; however, all data

shown herein was measured with these pins connected to

RF/DC ground externally.

2, 4, 15, 17 GND

Package bottom has an exposed metal paddle that must

also be connected to RF/DC ground.

3 RFIN

This pin is AC coupled

and matched to 50 Ohms.

9 Vgg

Gate control for amplier. Adjust to achieve Id of 250 mA.

Please follow “MMIC Amplier Biasing Procedure”

Application Note. External bypass capacitors of 100 pF,

1000 pF and 2.2 µF are required.

16 RFOUT

This pin is AC coupled

and matched to 50 Ohms.

23, 21, 19 Vdd1, Vdd2, Vdd3

Power Supply Voltage for the amplier. External bypass

capacitors of 100 pF, 1000pF, and 2.2 µF are required.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

LINEAR & POWER AMPLIFIERS - SMT

HMC498LC4

v04.0514

GaAs PHEMT MEDIUM

POWER AMPLIFIER, 17 - 24 GHz

Evaluation PCB

Item Description

J1, J2 2.92 mm PC mount K-connector

J3 - J8 DC Pin

C1 - C4 100 pF capacitor, 0402 pkg.

C5 - C8 1,000 pF Capacitor, 0603 pkg.

C9 - C12 2.2µF Capacitor, Tantalum

U1 HMC498LC4 Amplier

PCB

[2]

108535 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350.

List of Materials for Evaluation PCB 108537

[1]

The circuit board used in this application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads and exposed paddle should be connected

directly to the ground plane similar to that shown.

A sufficient number of via holes should be used to

connect the top and bottom ground planes. The

evaluation board should be mounted to an appro-

priate heat sink. The evaluation circuit board shown

is available from Hittite upon request.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

P1-P3 P4-P6

HMC498LC4

Mfr. #:

Buy HMC498LC4

Manufacturer:

Analog Devices / Hittite

Description:

RF Amplifier Medium pow amp SMT, 17 - 24 GHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HMC498LC4

HMC498LC4

Products related to this Datasheet