APD240
Document number: DS36971 Rev. 4 - 2
May 2018
© Diodes Incorporated
Maximum Ratings (T
A
= +25°C, unless otherwise noted.) (Note 4)
Maximum Repetitive Peak Reverse Voltage
Maximum DC Blocking Voltage
Average Rectified Forward Current
0.375 " (9.5mm) Lead Length (See Figure 1)
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-wave on Rated Load
Operating Junction Temperature Range (Note 5)
Storage Temperature Range
Notes: 4. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied.
Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability.
5. The heat generated must be less than the thermal conductivity from Junction to Ambient: dP
D
/dT
J
< 1/θ
JA
.
Thermal Characteristics (T
A
= +25°C, unless otherwise noted.)
Typical Thermal Resistance
(Note 6)
Note 6: Device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com/package-outlines.html.
Electrical Characteristics (T
A
= +25°C, unless otherwise noted.)
Forward Voltage @ I
F
= 2.0A
Reverse Current @ Rated V
R
(Note 7)
Note 7: Short duration pulse test used to minimize self-heating effect, Pulse Test: 300μs pulse width, 1.0% duty cycle.