OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2SP0320V2A0-12

P1-P3P4-P6P7-P9
2SP0320x2Ax-12
www.IGBT-Driver.com Page 1
2SP0320x2Ax-12
Preliminary Data Sheet
Compact, high-performance, plug-and-play dual-channel IGBT driver based on
SCALE™-2 technology for individual and parallel-connected modules in 2-level,
3-level and multilevel converter topologies
Abstract
The SCALE™-2 plug-and-play driver 2SP0320x2Ax-12 is a compact dual-channel intelligent gate driver
designed for 1200V IGBT modules from Danfoss, Fuji or Infineon. The driver features an electrical interface
(2SP0320T) or a fiber-optic interface (2SP0320V and 2SP0320S) with a built-in DC/DC power supply.
The turn-on and turn-off gate resistors of both channels are not assembled in order to provide
maximum flexibility. They must be assembled by the user before start of operation. Please refer to
the paragraph on “Gate Resistor Assembly” for the recommended gate resistors.
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to
www.IGBT-Driver.com/go/plug-and-play
Features Applications
Plug-and-play solution
Allows parallel connection of IGBT modules
For 2-level, 3-level and multilevel topologies
Shortens application development time
Extremely reliable; long service life
Built-in DC/DC power supply
20-pin flat cable interface (2SP0320T)
Fiber-optic links (2SP0320V & 2SP0320S)
Duty cycle 0... 100%
Active clamping of V
ce
at turn-off
IGBT short-circuit protection
Monitoring of supply voltage
Safe isolation to EN 50178
UL compliant
Suitable for 1200V IGBT modules
Gate resistors not assembled
Wind-power converters
Industrial drives
UPS
Power-factor correctors
Traction
Railroad power supplies
Welding
SMPS
Radiology and laser technology
Research
and many others
2SP0320x2Ax-12
Preliminary Data Sheet
www.IGBT-Driver.com Page 2
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
common data that apply to the whole series, please refer to “Description & Application Manual for 2SP0320T
SCALE-2 IGBT Drivers” (electrical interface) or “Description & Application Manual for 2SP0320V and 2SP0320S
SCALE-2 IGBT Drivers” (fiber-optic interface) on www.IGBT-Driver.com/go/2SP0320
.
The gate resistors on this gate driver are not assembled in order to provide maximum flexibility. For the gate
resistors required for specific IGBT modules, refer to the paragraph on “Gate Resistor Assembly”. Use of gate
resistors other than those specified may result in failure.
Mechanical Dimensions
Dimensions: See the relevant “Description and Application Manual”
Mounting principle: Connected to IGBT module with screws
Fiber-Optic Interfaces
Interface Remarks Part type #
Drive signal input 2SP0320V, fiber-optic receiver (Notes 21, 22) HFBR-2522Z
Drive signal input 2SP0320S, fiber-optic receiver (Notes 21, 22) HFBR-2412Z
Status output 2SP0320V, fiber-optic transmitter (Notes 21, 23) HFBR-1522Z
Status output 2SP0320S, fiber-optic transmitter (Notes 21, 23) HFBR-1412Z
2SP0320x2Ax-12
Preliminary Data Sheet
www.IGBT-Driver.com Page 3
Absolute Maximum Ratings
Parameter Remarks Min Max Unit
Supply voltage V
DC
VDC to GND 0 16 V
Supply voltage V
CC
VCC to GND (Note 1) 0 16 V
Logic input and output voltages To GND -0.5 VCC+0.5 V
SO
x
current Fault condition, total current 20 mA
Gate peak current I
out
Note 2 -20 +20 A
Average supply current I
DC
2SP0320T (Note 24) 600 mA
Average supply current I
DC
2SP0320V and 2SP0320S (Note 24) 690 mA
Output power per gate Ambient temperature <70°C (Note 3) 3 W
Ambient temperature 85°C (Note 3) 2 W
Turn-on gate resistance Note 17 0.3 Ω
Turn-off gate resistance Note 17 1 Ω
Switching frequency F Note 29 n.d. kHz
Test voltage (50Hz/1min.) Primary to secondary (Note 19) 3800 V
AC(eff)
Secondary to secondary (Note 19) 3800 V
AC(eff)
DC-link voltage Note 4 800 V
|dV/dt| Rate of change of input to output voltage (Note 20) 50 kV/μs
Operating voltage Primary/secondary, secondary/secondary 1200 V
peak
Operating temperature -40 +85 °C
Storage temperature -40 +90 °C
Recommended Operating Conditions
Power Supply Remarks Min Typ Max Unit
Supply voltage V
DC
To GND (Note 1) 14.5 15 15.5 V
Supply voltage V
CC
To GND (Note 1) 14.5 15 15.5 V
Resistance from TB to GND 2SP0320T, blocking time≠0, ext. value 128 ∞ kΩ
SO
x
current Fault condition, 3.3V logic 4 mA
P1-P3P4-P6P7-P9

2SP0320V2A0-12

Mfr. #:
Buy 2SP0320V2A0-12
Manufacturer:
Power Integrations
Description:
IC DUAL GATE DRIVER 20A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet